Vehicle identification number: 0710385
ML W163 ML 320 3.2 Suspension arm (218 hp Petrol M 112.942)
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Right
- Length [mm]: 378
- paired article number: VKDS 428057 B
- Thread Size 1: M14 x 1,5
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Rod / Strut: Coupling Rod
- Bore Diameter [mm]: 12,2
- Item number: VKDS 428058 B
- Manufacturer: SKF
- EAN number: 7316579452786
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Left
- Length [mm]: 378
- paired article number: VKDS 428058 B
- Thread Size 1: M14 x 1,5
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Rod / Strut: Coupling Rod
- Bore Diameter [mm]: 12,2
- Item number: VKDS 428057 B
- Manufacturer: SKF
- EAN number: 7316579453066
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle, outer, Upper, Right, Upper Front Axle
- paired article number: V30-7278
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 29
- Packaging height [cm]: 9,5
- Packaging Depth [cm]: 31,5
- Item number: V30-7279
- Manufacturer: VAICO
- EAN number: 4046001315237
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 13,5
- Fitting Position: Rear Axle, Left, Upper
- Cone Pitch: 1 / 6
- Thread Size 1: M12x1,5
- Item number: SKCA-0050789
- Manufacturer: STARK
- EAN number: 4059191461684
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- Item number: 301181372200
- Manufacturer: MAGNETI MARELLI
- EAN number: 8001063976563
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Left, Upper
- paired article number: 401 356
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with nut, with ball joint
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: 401 355
- Manufacturer: TOPRAN
- EAN number: 3330050000017
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Right, Upper
- paired article number: 401 355
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: 401 356
- Manufacturer: TOPRAN
- EAN number: 3330160000013
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Original VAICO Quality
- Fitting Position: Left, Upper Front Axle
- paired article number: V30-7279
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 35
- Packaging height [cm]: 8
- Packaging Depth [cm]: 38
- Item number: V30-7278
- Manufacturer: VAICO
- EAN number: 4046001315121
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle Left, Upper
- Item number: 49398607
- Manufacturer: CORTECO
- EAN number: 3358960632241
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 15
- Fitting Position: Rear Axle Left, Lower
- Length [mm]: 385
- paired article number: QSJ3713S
- Item number: QSJ3712S
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438422412
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 15
- Fitting Position: Rear Axle Right, Lower
- Length [mm]: 385
- paired article number: QSJ3712S
- Item number: QSJ3713S
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438422467
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- for OE number: 163 333 0001
- Item number: 02.31.218
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081051600
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Left
- for OE number: 163 352 0401
- Item number: 02.32.148
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081051624
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Left, Upper, Rear Axle, outer, Left, Rear
- paired article number: ZWT-ME-001
- Fabrication Number: ZWT-ME-000
- Item number: ZWT-ME-000
- Manufacturer: NTY
- EAN number: 5902048003003
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 13,4
- Fitting Position: Front Axle Left, outer, Upper
- Length [mm]: 228
- paired article number: 210362
- Thread Size: M12X1,5 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 1,929
- as standard
- Item number: 210361
- Manufacturer: A.B.S.
- EAN number: 8717109313376
- Condition: New
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Right, Upper, Rear Axle, outer, Right, Rear
- paired article number: ZWT-ME-000
- Fabrication Number: ZWT-ME-001
- Item number: ZWT-ME-001
- Manufacturer: NTY
- EAN number: 5902048003010
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle Left, Upper
- paired article number: 51843
- Required quantity: 1
- Item number: 51842
- Manufacturer: MAPCO
- EAN number: 4043605592828
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle Right, Upper
- paired article number: 51842
- Required quantity: 1
- Item number: 51843
- Manufacturer: MAPCO
- EAN number: 4043605592859
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 13,5
- Fitting Position: behind the axle, Rear Axle Right, outer, Upper
- Length [mm]: 210
- paired article number: 211267
- Thread Size: M12X1,5 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 2,265
- as standard
- Item number: 211268
- Manufacturer: A.B.S.
- EAN number: 8717109514704
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 13,5
- Fitting Position: behind the axle, Rear Axle Left, outer, Upper
- Length [mm]: 210
- paired article number: 211268
- Thread Size: M12X1,5 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 2,274
- as standard
- Item number: 211267
- Manufacturer: A.B.S.
- EAN number: 8717109514698
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5