Mercedes W166 ML 300 3.5 4-matic Suspension arm (252 hp Petrol M 276.955)
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower Right, Front Axle
- Item number: RH14-3057
- Manufacturer: REINHOCH
- EAN number: 5901655159998
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Diameter [mm]: 43
- Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Rear
- Length [mm]: 522
- Pipe Diameter [mm]: 20
- Inner Diameter [mm]: 12
- Item number: JTC1889
- Manufacturer: TRW
- EAN number: 3322938347413
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle, Left
- Length [mm]: 372
- paired article number: V30-2885
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 8,6
- Packaging height [cm]: 4,2
- Packaging Depth [cm]: 43,6
- Item number: V30-2886
- Manufacturer: VAICO
- EAN number: 4046001844294
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Left, Rear Axle Right, Rear
- Length [mm]: 522
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Required quantity: 2
- Rod / Strut: Guide Rod
- Inner Diameter 2 [mm]: 12
- Item number: 58196309
- Manufacturer: METZGER
- EAN number: 4062101256614
- Condition: New

- Control / Trailing Arm Type: Semi-Trailing Arm
- Fitting Position: Rear Axle Left
- for OE number: 166 350 0106
- Item number: 02.32.206
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081197131
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Left, Front Axle
- Item number: RH14-3061
- Manufacturer: REINHOCH
- EAN number: 5901655160031
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Rear Axle, Rear, both sides, Upper
- Length [mm]: 522
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Required quantity: 2
- Mounting points diameter [mm]: 12,2
- Item number: G5-959
- Manufacturer: OPTIMAL
- EAN number: 4031185592925
- Condition: New
price incl. 19% VAT
excl. delivery costs

- Control / Trailing Arm Type: Semi-Trailing Arm
- Fitting Position: outer, Centre, Rear Axle, Front
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Required quantity: 2
- Item number: 8500 23599
- Manufacturer: TRISCAN
- EAN number: 5710476300447
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel, Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: both sides, Rear Axle
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 5,3
- Packaging height [cm]: 6,5
- Item number: V30-3101
- Manufacturer: VAICO
- EAN number: 4046001811050
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle, in front of axle, Left, Upper, Right
- Length [mm]: 443
- Height [mm]: 61
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Width [mm]: 52
- Item number: TC7909
- Manufacturer: DELPHI
- EAN number: 68960436769
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle, Right, Upper
- paired article number: ME-TC-13979
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 46,5
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8
- Item number: ME-TC-13980
- Manufacturer: MOOG
- EAN number: 4044197983322
- Condition: New

- Control / Trailing Arm Type: Semi-Trailing Arm
- Fitting Position: Rear Axle both sides
- for OE number: 166 350 0306
- Item number: 02.32.208
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081197223
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, both sides, Front
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Box
- Packaging length [cm]: 47,5
- Packaging width [cm]: 11
- Packaging height [cm]: 8
- Item number: ME-TC-14939
- Manufacturer: MOOG
- EAN number: 4060426156572
- Condition: New
-
- Fitting Position: outer
- paired article number: TC3053
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Right, Upper
- Length [mm]: 290
- Height [mm]: 108
- paired article number: TC3053
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 260
- Item number: TC3054
- Manufacturer: DELPHI
- EAN number: 5012759965849
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Front, Rear Axle Left, Rear Axle Right
- Required quantity: 2
- replacement in pairs recommended
- Item number: 016 050 0154
- Manufacturer: MEYLE
- EAN number: 4040074254134
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: outer
- paired article number: TC3054
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Left, Upper
- Length [mm]: 290
- Height [mm]: 108
- paired article number: TC3054
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 260
- Item number: TC3053
- Manufacturer: DELPHI
- EAN number: 5012759965832
- Condition: New
price incl. 19% VAT
excl. delivery costs

- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Upper, Front, Rear Axle Right, Rear Axle Left
- Length [mm]: 390
- Item number: 49107343
- Manufacturer: CORTECO
- EAN number: 3358960932389
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Rear Axle Left, Upper, Front, Rear Axle Right
- Weight [kg]: 1,533
- Observe service information
- Item number: 181367
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224813676
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Trailing Arm
- Material: Cast Steel
- Fitting Position: in front of axle, Rear Axle Left, Rear Axle Right, outer, Upper
- Length [mm]: 391
- paired article number: 211798
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Weight [kg]: 1,129
- as standard
- Item number: 211798
- Manufacturer: A.B.S.
- EAN number: 8717109674743
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Trailing Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle, Right, Upper
- paired article number: 42365 01
- Article number of recommended accessories: 38812 01
- Item number: 42366 01
- Manufacturer: ³¢·¡²Ñ¹óÖ¸é¶Ù·¡¸é
- EAN number: 4047437518469
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5