Vehicle identification number: 1313GGN
Mercedes A217 AMG S 63 5.5 Suspension arm (585 hp Petrol M 157.985)
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20,4
- Fitting Position: Upper, Front Axle Right
- paired article number: 59470
- Vehicle configuration line / variant: ALL
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 59471
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978829989
- Condition: New
price incl. 19% VAT
-
- Vehicle configuration line / variant: EXC. COUPE
- Drive Type: Rear-Wheel Drive
- Suspension: for vehicles w / out Active Body Control
- Control / Trailing Arm Type: Trailing Arm
- Material: Aluminium
- Cone Size [mm]: 16
- Fitting Position: Rear, Lower, Front Axle Left
- Length [mm]: 360
- paired article number: 49853
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Observe service information
- Item number: 49852
- Manufacturer: SIDEM
- EAN number: 5413978264834
- Condition: New
price incl. 19% VAT
-
- Vehicle configuration line / variant: EXC. COUPE
- Suspension: for vehicles w / out Active Body Control
- Control / Trailing Arm Type: Trailing Arm
- Material: Aluminium
- Cone Size [mm]: 16
- Fitting Position: Rear, Lower, Front Axle Right
- Length [mm]: 360
- paired article number: 49852
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Observe service information
- Item number: 49853
- Manufacturer: SIDEM
- EAN number: 5413978264841
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 18,5
- Fitting Position: Front Axle Right
- Cone Pitch: 1 / 5
- paired article number: V30-1741
- Vehicle configuration line / variant: ABC SUSP., EXC. 4MATIC, EXC. COUPE
- Article number of the recommended special tool: V99-1020
- Item number: V30-1742
- Manufacturer: VAICO
- EAN number: 4062375049400
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Vehicle configuration line / variant: EXC. COUPE
- Drive Type: Rear-Wheel Drive
- Suspension: for vehicles w / out Active Body Control
- Control / Trailing Arm Type: Trailing Arm
- Material: Aluminium
- Cone Size [mm]: 16
- Fitting Position: Rear, Lower, Front Axle Left
- Length [mm]: 360
- paired article number: 59469
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Observe service information
- Item number: 59468
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978830213
- Condition: New
price incl. 19% VAT
-
- Vehicle configuration line / variant: EXC. COUPE
- Suspension: for vehicles w / out Active Body Control
- Control / Trailing Arm Type: Trailing Arm
- Material: Aluminium
- Cone Size [mm]: 16
- Fitting Position: Rear, Lower, Front Axle Right
- Length [mm]: 360
- paired article number: 59468
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Observe service information
- Item number: 59469
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978830220
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 18,5
- Fitting Position: behind the axle, Front Axle Left, outer, Lower
- Length [mm]: 360
- paired article number: 212017
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 2,57
- as standard
- Item number: 212016
- Manufacturer: A.B.S.
- EAN number: 8717109775112
- Condition: New
Important: Observe Fitting Instructions
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 18,5
- Fitting Position: behind the axle, Front Axle Right, outer, Lower
- Length [mm]: 360
- paired article number: 212016
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 2,57
- as standard
- Item number: 212017
- Manufacturer: A.B.S.
- EAN number: 8717109775150
- Condition: New
Important: Observe Fitting Instructions
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Vehicle configuration line / variant: EXC. COUPE
- Suspension: for vehicles with Active Body Control
- Control / Trailing Arm Type: Trailing Arm
- Material: Aluminium
- Cone Size [mm]: 18,5
- Fitting Position: Rear, Lower, Front Axle Left
- Length [mm]: 360
- paired article number: 49855
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Observe service information
- Item number: 49854
- Manufacturer: SIDEM
- EAN number: 5413978264865
- Condition: New
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Drive Type: Rear-Wheel Drive
- Suspension: for vehicles with Active Body Control
- Control / Trailing Arm Type: Trailing Arm
- Material: Aluminium
- Cone Size [mm]: 18,5
- Fitting Position: Rear, Lower, Front Axle Right
- Length [mm]: 360
- paired article number: 49854
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Observe service information
- Item number: 49855
- Manufacturer: SIDEM
- EAN number: 5413978264872
- Condition: New
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Vehicle configuration line / variant: EXC. COUPE
- Suspension: for vehicles with Active Body Control
- Control / Trailing Arm Type: Trailing Arm
- Material: Aluminium
- Cone Size [mm]: 18,5
- Fitting Position: Rear, Lower, Front Axle Left
- Length [mm]: 360
- paired article number: 59506
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Observe service information
- Item number: 59505
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978830237
- Condition: New
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Drive Type: Rear-Wheel Drive
- Suspension: for vehicles with Active Body Control
- Control / Trailing Arm Type: Trailing Arm
- Material: Aluminium
- Cone Size [mm]: 18,5
- Fitting Position: Rear, Lower, Front Axle Right
- Length [mm]: 360
- paired article number: 59505
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Observe service information
- Item number: 59506
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978830244
- Condition: New
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Control / Trailing Arm Type: Trailing Arm
- Fitting Position: Rear Axle, Right, Lower
- paired article number: G5-770
- Item number: G5-771
- Manufacturer: OPTIMAL
- EAN number: 4031185249041
- Condition: New
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle, Rear, Left, Upper
- paired article number: G5-931
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Required quantity: 1
- Item number: G5-930
- Manufacturer: OPTIMAL
- EAN number: 4031185670586
- Condition: New
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Lower, Front Axle Left
- Length [mm]: 432
- Control / Trailing Arm Type: Trailing Arm
- Rod / Strut: Push Rod
- Observe service information
- paired article number: 49051
- Item number: 49050
- Manufacturer: SIDEM
- EAN number: 5413978238514
- Condition: New
- Fitting Position: Rear Axle Left, Upper
- Rod / Strut: Pull Rod
- paired article number: V30-8305
- Material: Aluminium
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 12,1
- Packaging height [cm]: 4,2
- Packaging Depth [cm]: 45
- Item number: V30-8304
- Manufacturer: VAICO
- EAN number: 4046001425639
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle Right, Upper
- Rod / Strut: Pull Rod
- paired article number: V30-8304
- Material: Aluminium
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 10,5
- Packaging height [cm]: 45
- Packaging Depth [cm]: 8
- Item number: V30-8305
- Manufacturer: VAICO
- EAN number: 4046001425646
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle Upper, Left Rear, outer, Rear Axle Left
- Rod / Strut: Camber Link
- paired article number: V30-8307
- Material: Aluminium
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 6
- Packaging height [cm]: 3,9
- Packaging Depth [cm]: 38
- Item number: V30-8306
- Manufacturer: VAICO
- EAN number: 4046001425684
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle Upper, Right Rear, outer, Rear Axle Right
- Rod / Strut: Camber Link
- paired article number: V30-8306
- Material: Aluminium
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 8
- Packaging height [cm]: 41
- Packaging Depth [cm]: 10,5
- Item number: V30-8307
- Manufacturer: VAICO
- EAN number: 4046001425691
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Braking System: for vehicles with ceramic brakes
- paired article number: 177422
- Length [mm]: 395
- Material: Aluminium
- Rod / Strut: Push Rod
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Right, Rear Axle Upper
- Weight [kg]: 0,831
- Observe service information
- Item number: 177833
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224778333
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 3
- 4
- 5
- 6
- 7