Mercedes Sprinter 3t 314 NGT Suspension arm (129 hp Petrol/Compressed Natural Gas (CNG) M 111.979)
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 23,5
- Fitting Position: Left, Front Axle, Front Axle Left
- Length [mm]: 368
- Thread Size: M20x1.5
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with nut
- Diameter 1 [mm]: 14,2
- Item number: 273C0629
- Manufacturer: RIDEX
- EAN number: 4059191407996
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle Left
- Weight [g]: 1055, 1051
- Rod / Strut: Guide Rod
- Item number: 37503
- Manufacturer: ORIGINAL IMPERIUM
- EAN number: 8033989139234
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 23,5
- Fitting Position: Left, Front Axle, Front Axle Left
- Length [mm]: 368
- Thread Size: M20x1.5
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with nut
- Diameter 1 [mm]: 14,2
- Item number: SKCA-0050627
- Manufacturer: STARK
- EAN number: 4059191275441
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower
- paired article number: VKDS 328055 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 328054 B
- Manufacturer: SKF
- EAN number: 7316579254946
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 23,4
- Fitting Position: Right, Front Axle
- Length [mm]: 374
- Supplementary Article / Supplementary Info Info 2: with nut
- Item number: SKCA-0050641
- Manufacturer: STARK
- EAN number: 4059191343171
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle Right, outer, Lower, Right, Lower Front Axle
- paired article number: V30-7499
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 19
- Packaging height [cm]: 10
- Packaging Depth [cm]: 37,5
- Item number: V30-7498
- Manufacturer: VAICO
- EAN number: 4046001354007
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Front Axle Right
- paired article number: VKDS 328054 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 328055 B
- Manufacturer: SKF
- EAN number: 7316579254953
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle Left, outer, Lower, Left, Lower Front Axle
- paired article number: V30-7498
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 19
- Packaging height [cm]: 10
- Packaging Depth [cm]: 37,5
- Item number: V30-7499
- Manufacturer: VAICO
- EAN number: 4046001354021
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Left
- paired article number: ME-WP-2333
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 51
- Packaging width [cm]: 44,5
- Packaging height [cm]: 15
- Item number: ME-WP-2332
- Manufacturer: MOOG
- EAN number: 4044197332328
- Condition: New
-
- Fitting Position: Front Axle Left, outer, Lower
- Axle Version: 730.409
- Vehicle configuration line / variant: +Front Axle 730.409
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 23,5
- Length [mm]: 368
- paired article number: 210838
- Thread Size: M20X1,5 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 7,5
- as standard
- Item number: 210837
- Manufacturer: A.B.S.
- EAN number: 8717109349696
- Condition: New
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 23,5
- Fitting Position: Front Axle Left
- paired article number: FT15185
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Item number: FT15184
- Manufacturer: FAST
- EAN number: 5904157831805
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 23,5
- Fitting Position: Front Axle Right
- paired article number: FT15184
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Item number: FT15185
- Manufacturer: FAST
- EAN number: 5904157813030
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- Item number: 1140102780
- Manufacturer: JP GROUP
- EAN number: 5710412215651
- Condition: New
- Control / Trailing Arm Type: Triangular Control Arm (CV)
- Fitting Position: Front Axle Left
- for OE number: 901 330 1807
- Item number: 02.31.160
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081974978
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: 51894
- Required quantity: 1
- Item number: 51893
- Manufacturer: MAPCO
- EAN number: 4043605869708
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: 51893
- Required quantity: 1
- Item number: 51894
- Manufacturer: MAPCO
- EAN number: 4043605869715
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- External Thread 2 [mm]: M20x1,5
- Weight [kg]: 7,128
- Item number: 96-01478-1
- Manufacturer: RTS
- EAN number: 20107203572989357298
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower
- External Thread 2 [mm]: M20x1,5
- Weight [kg]: 7,128
- Item number: 96-01478-2
- Manufacturer: RTS
- EAN number: 20107203572990357299
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left
- paired article number: 821 0594 10
- Item number: 821 0593 10
- Manufacturer: FAG
- EAN number: 4014870413941
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right
- paired article number: 821 0593 10
- Item number: 821 0594 10
- Manufacturer: FAG
- EAN number: 4014870415846
- Condition: New
- 1
- 2
- 3
- 4
- 5