Nissan Murano Z51 3.5 4x4 Suspension arm (249 hp Petrol VQ35DE)
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower, Front Axle, outer, Right
- Item number: 273C2550
- Manufacturer: RIDEX
- EAN number: 4066423548945
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Lower, Front Axle Right
- Rod / Strut: Push Rod
- Item number: 273C1713
- Manufacturer: RIDEX
- EAN number: 4064138099226
- Condition: New
-
- Transmission Type: CVT automatic transmission (stepless)
- for model code: CZ51, Z51, Z51R
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Lower
- Weight [kg]: 0,99
- Packaging length [cm]: 35,4
- Packaging width [cm]: 7,5
- Packaging height [cm]: 5,8
- Item number: 0225-J32R1
- Manufacturer: FEBEST
- EAN number: 4056111073989
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
- Fabrication Number: ZWT-NS-036
- Item number: ZWT-NS-036
- Manufacturer: NTY
- EAN number: 5908281462492
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Rear Axle, Rear Axle Left, Rear Axle Right
- Fabrication Number: ZWT-NS-037
- Item number: ZWT-NS-037
- Manufacturer: NTY
- EAN number: 5908281462508
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: PU (Polyurethane)
- Supplementary Info: 80 Sha
- Diameter [mm]: 72
- Fitting Position: Front axle both sides, Lower
- Height [mm]: 75
- Item number: 4302049-00/80SHA
- Manufacturer: MPBS
- EAN number: 5904815810050
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Front Axle Left, outer, Lower
- Length [mm]: 378
- paired article number: 210158
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Weight [kg]: 4,268
- as standard
- Item number: 210157
- Manufacturer: A.B.S.
- EAN number: 8717109760354
- Condition: New
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower, Front Axle, outer, Right
- paired article number: ZWD-NS-132
- Fabrication Number: ZWD-NS-133
- Item number: ZWD-NS-133
- Manufacturer: NTY
- EAN number: 5902048003072
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower
- paired article number: ZWD-NS-133
- Fabrication Number: ZWD-NS-132
- Item number: ZWD-NS-132
- Manufacturer: NTY
- EAN number: 5902048003065
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Front Axle Right, outer, Lower
- Length [mm]: 378
- paired article number: 210157
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Weight [kg]: 4,268
- as standard
- Item number: 210158
- Manufacturer: A.B.S.
- EAN number: 8717109760392
- Condition: New
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Lower Front Axle, Left
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joints, without bearing
- Weight [kg]: 4,4
- Always compare old and new part (in particular OE No.)
- Item number: 69SKV367
- Manufacturer: ESEN SKV
- EAN number: 5906302223985
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Lower Front Axle, Right
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joints, without bearing
- Weight [kg]: 4,44
- Always compare old and new part (in particular OE No.)
- Item number: 69SKV368
- Manufacturer: ESEN SKV
- EAN number: 5906302223992
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 20
- Fitting Position: Lower, Front Axle Left
- paired article number: S062020
- Item number: S062019
- Manufacturer: GSP
- EAN number: 6941221914803
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Lower, Front Axle Left
- paired article number: 41379
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 41378
- Manufacturer: SIDEM
- EAN number: 5413978238965
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Lower, Front Axle Right
- paired article number: 41378
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 41379
- Manufacturer: SIDEM
- EAN number: 5413978238972
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Left, Lower, Left
- paired article number: A38-9622
- Item number: A38-9623
- Manufacturer: ACKOJA
- EAN number: 4062375229277
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 20
- Fitting Position: Lower, Front Axle Right
- paired article number: S062019
- Item number: S062020
- Manufacturer: GSP
- EAN number: 6941221914810
- Condition: New
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Lower, Front Axle Left
- paired article number: 57842
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 57841
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978816040
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Lower, Front Axle Right
- paired article number: 57841
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 57842
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978816057
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Right, Lower, Right
- paired article number: A38-9623
- Item number: A38-9622
- Manufacturer: ACKOJA
- EAN number: 4062375229239
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- 1
- 2
- 3