Vehicle identification number: 1329AMG
Nissan NV400 Van dCi 180 Suspension arm (179 hp Diesel M9T 716)
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 17,5
- Fitting Position: Front Axle Right, Lower
- Length [mm]: 620
- Height [mm]: 82
- Width [mm]: 330
- Item number: RH04-2055
- Manufacturer: REINHOCH
- EAN number: 5901655211979
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 17,5
- Fitting Position: Front Axle Left, Lower
- Length [mm]: 620
- Height [mm]: 82
- Width [mm]: 330
- Item number: RH04-2056
- Manufacturer: REINHOCH
- EAN number: 5901655211986
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Cone Size [mm]: 17,5
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle Right
- Cone Pitch: 1 / 5
- paired article number: V46-0544
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 33,2
- Packaging height [cm]: 9
- Packaging Depth [cm]: 61,9
- Item number: V46-0545
- Manufacturer: VAICO
- EAN number: 4046001558115
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Cone Size [mm]: 17,5
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle Left
- Cone Pitch: 1 / 5
- paired article number: V46-0545
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 44,6
- Packaging height [cm]: 9
- Packaging Depth [cm]: 48
- Item number: V46-0544
- Manufacturer: VAICO
- EAN number: 4046001558245
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Right, Lower
- paired article number: RE-TC-10093
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Packing Type: Box
- Article number of recommended accessories: OP-BJ-12502
- Packaging length [cm]: 64
- Packaging width [cm]: 49,5
- Packaging height [cm]: 14,5
- Item number: RE-TC-10092
- Manufacturer: MOOG
- EAN number: 4044197599738
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Left, Lower
- paired article number: RE-TC-10092
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Packing Type: Box
- Article number of recommended accessories: OP-BJ-8965
- Packaging length [cm]: 64
- Packaging width [cm]: 49,5
- Packaging height [cm]: 14,5
- Item number: RE-TC-10093
- Manufacturer: MOOG
- EAN number: 4044197599721
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 23
- Fitting Position: Front Axle Right, Lower
- paired article number: 175616
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 10,398
- Inner Diameter [mm]: 16
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Item number: 175615
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224756157
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Lower, Front Axle Left
- paired article number: 16-16 050 0053
- Supplementary Article / Supplementary Info Info 2: without ball joint, with rubber mount
- Required quantity: 1
- Article number of recommended accessories: 16-16 010 0019
- replacement in pairs recommended
- Item number: 16-16 050 0054
- Manufacturer: MEYLE
- EAN number: 4040074101056
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Lower, Front Axle Right
- paired article number: 16-16 050 0054
- Supplementary Article / Supplementary Info Info 2: without ball joint, with rubber mount
- Required quantity: 1
- Article number of recommended accessories: 16-16 010 0031
- replacement in pairs recommended
- Item number: 16-16 050 0053
- Manufacturer: MEYLE
- EAN number: 4040074101032
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Right
- paired article number: 821 0868 10
- Item number: 821 0865 10
- Manufacturer: FAG
- EAN number: 4014870416003
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Left
- paired article number: 821 0865 10
- Item number: 821 0868 10
- Manufacturer: FAG
- EAN number: 4014870421670
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Iron
- Cone Size [mm]: 17
- Fitting Position: Front Axle Right
- paired article number: 5076
- Rod / Strut: Push Rod
- Item number: 5077
- Manufacturer: SIDEM
- EAN number: 5413978231157
- Condition: New
price incl. 19% VAT
excl. delivery costs
Sample photo only
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower
- paired article number: 1240103180
- Item number: 1240103170
- Manufacturer: JP GROUP
- EAN number: 5714670508838
- Condition: New
Sample photo only
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- paired article number: 1240103170
- Item number: 1240103180
- Manufacturer: JP GROUP
- EAN number: 5714670508821
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- paired article number: 58118702
- Supplementary Article / Supplementary Info Info 2: without ball joint, with rubber mount
- Item number: 58118601
- Manufacturer: METZGER
- EAN number: 4062101075604
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- paired article number: 58118601
- Supplementary Article / Supplementary Info Info 2: without ball joint, with rubber mount
- Item number: 58118702
- Manufacturer: METZGER
- EAN number: 4062101075826
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 23
- Fitting Position: Front Axle Left, Lower
- paired article number: 175615
- Weight [kg]: 10,398
- Inner Diameter [mm]: 16
- Observe service information
- Item number: 175616
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224756164
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Cast Iron
- Cone Size [mm]: 17
- Fitting Position: Front Axle Left
- paired article number: 5077
- Rod / Strut: Push Rod
- Item number: 5076
- Manufacturer: SIDEM
- EAN number: 5413978231140
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 23
- Fitting Position: Front Axle Right, Lower
- paired article number: 33 10 2978
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 10,398
- Inner Diameter [mm]: 16
- Supplementary Article / Supplementary Info: with rubber mounts
- Item number: 33 10 2977
- Manufacturer: SWAG
- EAN number: 4054228756153
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 23
- Fitting Position: Front Axle Right, Lower
- paired article number: ADBP860104
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 10,398
- Inner Diameter [mm]: 16
- Supplementary Article / Supplementary Info: with rubber mounts
- Item number: ADBP860103
- Manufacturer: BLUE PRINT
- EAN number: 5057746343538
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1
- 2
- 3