OPEL Astra J Box Body / Estate (P10) 2.0 CDTi Suspension arm (165 hp Diesel A 20 DTH)
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Front Axle, Left, outer, Lower, Front Axle Left
- Length [mm]: 331,5
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Weight [kg]: 3,000
- Item number: 273C0819
- Manufacturer: RIDEX
- EAN number: 4059191764914
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Right, Lower, Front Axle
- Length [mm]: 331,5
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Supplementary Article / Supplementary Info: with holder
- Mounting points diameter [mm]: 12,1
- Bolt Head Diameter [mm]: 20
- Item number: 273C0831
- Manufacturer: RIDEX
- EAN number: 4059191764952
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Left, Rear Axle Right, Centre, Rear Axle both sides
- Item number: S062997
- Manufacturer: GSP
- EAN number: 221066816658552166585
- Condition: New
- Control / Trailing Arm Type: Control Arm, Trailing Arm
- Fitting Position: Rear, Rear Axle
- Weight [kg]: 0,847
- Observe service information
- Item number: 176307
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224763070
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Centre
- Weight [kg]: 0,92
- Rod / Strut: Coupling Rod
- Model Year to: 2013
- Packaging length [cm]: 13,0
- Packaging width [cm]: 5,8
- Packaging height [cm]: 5,0
- Item number: 1824-ASJR
- Manufacturer: FEBEST
- EAN number: 4056111095943
- Condition: New
- Control / Trailing Arm Type: Control Arm, Trailing Arm
- Material: CR (chloroprene rubber)
- Fitting Position: Rear, Rear Axle
- Weight [kg]: 0,847
- Item number: 33 10 3466
- Manufacturer: SWAG
- EAN number: 4054228763076
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Front Axle, Left, outer, Lower, Front Axle Left
- Length [mm]: 331,5
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Item number: SKCA-0050817
- Manufacturer: STARK
- EAN number: 4059191462490
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Right, Lower, Front Axle
- Length [mm]: 331,5
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Supplementary Article / Supplementary Info: with holder
- Mounting points diameter [mm]: 12,1
- Bolt Head Diameter [mm]: 20
- Item number: SKCA-0050829
- Manufacturer: STARK
- EAN number: 4059191463077
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: M-S1932
- Supplementary Article / Supplementary Info Info 2: with ball joint, with bearing(s)
- Supplementary Article / Supplementary Info: with holder
- Item number: M-S1931
- Manufacturer: MERTZ
- EAN number: 5902701065539
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Left
- paired article number: M-S1931
- Supplementary Article / Supplementary Info Info 2: with ball joint, with bearing(s)
- Supplementary Article / Supplementary Info: with holder
- Item number: M-S1932
- Manufacturer: MERTZ
- EAN number: 5902701065546
- Condition: New

- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Front Axle Left, outer, Lower Front Axle, Left
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joints, without bearing
- Weight [kg]: 3,26
- Always compare old and new part (in particular OE No.)
- Item number: 69SKV523
- Manufacturer: ESEN SKV
- EAN number: 5906302225545
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Right, Lower
- paired article number: 181748
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 4,402
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Item number: 181745
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224817452
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Original VAICO Quality
- Fitting Position: Lower, Front Axle Left
- paired article number: V51-0072
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Mounting Type: Hydro Mount
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 18,5
- Packaging height [cm]: 8,3
- Packaging Depth [cm]: 36,3
- Item number: V51-0073
- Manufacturer: VAICO
- EAN number: 4046001707308
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Left, Lower
- paired article number: 181745
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 4,402
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Item number: 181748
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224817483
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- paired article number: VKDS 325036 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Inner Diameter [mm]: 12,1
- Supplementary Article / Supplementary Info: with synthetic grease
- Item number: VKDS 325035 B
- Manufacturer: SKF
- EAN number: 7316579289757
- Condition: New
-
- Fitting Position: Front Axle Left, outer
- paired article number: TC2588
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Left, Lower
- Length [mm]: 530
- Height [mm]: 85
- paired article number: TC2588
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 290
- Item number: TC2587
- Manufacturer: DELPHI
- EAN number: 5012759493236
- Condition: New
-
- Fitting Position: Front Axle Right, outer
- paired article number: TC2587
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Right, Lower
- Length [mm]: 530
- Height [mm]: 85
- paired article number: TC2587
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 290
- Item number: TC2588
- Manufacturer: DELPHI
- EAN number: 5012759493243
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle Left
- paired article number: 616 050 0033
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Supplementary Article / Supplementary Info: with accessories
- replacement in pairs recommended
- Item number: 616 050 0034
- Manufacturer: MEYLE
- EAN number: 4040074101575
- Condition: New
With mounting materials, to fit most models. Please check fit accuracy before installation.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle Right
- paired article number: 616 050 0034
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Supplementary Article / Supplementary Info: with accessories
- replacement in pairs recommended
- Item number: 616 050 0033
- Manufacturer: MEYLE
- EAN number: 4040074101568
- Condition: New
With mounting materials, to fit most models. Please check fit accuracy before installation.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Front Axle Right, outer, Lower
- Length [mm]: 332
- paired article number: 211322
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 2,942
- Mounting Type: Hydro Mount
- as standard
- Item number: 211323
- Manufacturer: A.B.S.
- EAN number: 8717109612387
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5