Vehicle identification number: 0035AWO
Opel Astra J Saloon 1.6 Suspension arm (116 hp Petrol A 16 XER)
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Front Axle Left
- paired article number: 36887-PCS-MS
- Quantity per axle: 1
- Net weight [kg]: 3,15
- Gross Weight [kg]: 3,2
- Item number: 36886-PCS-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4250083167930
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Original VAICO Quality
- Fitting Position: Lower Front Axle, Right
- paired article number: V40-0897
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 35
- Packaging height [cm]: 8,5
- Packaging Depth [cm]: 39
- Item number: V40-0898
- Manufacturer: VAICO
- EAN number: 4046001585418
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Right, Lower
- paired article number: 181748
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 4,402
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Item number: 181745
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224817452
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Right
- paired article number: 208 155
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- Supplementary Article / Supplementary Info: with holder
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: 208 154
- Manufacturer: TOPRAN
- EAN number: 1075200000012
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Left
- paired article number: 208 154
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- Supplementary Article / Supplementary Info: with holder
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: 208 155
- Manufacturer: TOPRAN
- EAN number: 1075180000019
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Original VAICO Quality
- Fitting Position: Lower, Front Axle Left
- Engine Code: A16XER
- paired article number: V51-0072
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Mounting Type: Hydro Mount
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 18,5
- Packaging height [cm]: 8,3
- Packaging Depth [cm]: 36,3
- Item number: V51-0073
- Manufacturer: VAICO
- EAN number: 4046001707308
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- Item number: 301181389000
- Manufacturer: MAGNETI MARELLI
- EAN number: 8001063821139
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- Item number: 301181389100
- Manufacturer: MAGNETI MARELLI
- EAN number: 8001063844404
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Left, Lower
- paired article number: 181745
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 4,402
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Item number: 181748
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224817483
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- paired article number: VKDS 325036 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Inner Diameter [mm]: 12,1
- Supplementary Article / Supplementary Info: with synthetic grease
- Item number: VKDS 325035 B
- Manufacturer: SKF
- EAN number: 7316579289757
- Condition: New
-
- Fitting Position: Front Axle Left, outer
- paired article number: TC2588
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Left, Lower
- Length [mm]: 530
- Height [mm]: 85
- paired article number: TC2588
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 290
- Item number: TC2587
- Manufacturer: DELPHI
- EAN number: 5012759493236
- Condition: New
-
- Fitting Position: Front Axle Right, outer
- paired article number: TC2587
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Right, Lower
- Length [mm]: 530
- Height [mm]: 85
- paired article number: TC2587
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 290
- Item number: TC2588
- Manufacturer: DELPHI
- EAN number: 5012759493243
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle Left
- paired article number: 616 050 0033
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Supplementary Article / Supplementary Info: with accessories
- replacement in pairs recommended
- Item number: 616 050 0034
- Manufacturer: MEYLE
- EAN number: 4040074101575
- Condition: New
With mounting materials, to fit most models. Please check fit accuracy before installation.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle Right
- paired article number: 616 050 0034
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Supplementary Article / Supplementary Info: with accessories
- replacement in pairs recommended
- Item number: 616 050 0033
- Manufacturer: MEYLE
- EAN number: 4040074101568
- Condition: New
With mounting materials, to fit most models. Please check fit accuracy before installation.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Front Axle Right, outer, Lower
- Length [mm]: 332
- paired article number: 211322
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 2,942
- Mounting Type: Hydro Mount
- as standard
- Item number: 211323
- Manufacturer: A.B.S.
- EAN number: 8717109612387
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Front Axle Left, outer, Lower
- Length [mm]: 332
- paired article number: 211323
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 2,942
- Mounting Type: Hydro Mount
- as standard
- Item number: 211322
- Manufacturer: A.B.S.
- EAN number: 8717109612370
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: 43720
- Supplementary Article / Supplementary Info Info 2: with bearing(s), with ball joint
- Weight [kg]: 3,285
- Supplementary Article / Supplementary Info: with holder
- Observe service information
- Item number: 43719
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816437192
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Right, Lower
- paired article number: 33 10 8398
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 4,402
- Supplementary Article / Supplementary Info: with rubber mounts
- Item number: 33 10 8395
- Manufacturer: SWAG
- EAN number: 4054228817458
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: 43719
- Supplementary Article / Supplementary Info Info 2: with bearing(s), with ball joint
- Weight [kg]: 3,285
- Supplementary Article / Supplementary Info: with holder
- Observe service information
- Item number: 43720
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816437208
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Right, Lower
- Item number: 49398630
- Manufacturer: CORTECO
- EAN number: 3358960632470
- Condition: New
- 1
- 2
- 3
- 4
- 5