Opel Meriva x03 1.7 CDTI Suspension arm (100 hp Diesel Z 17 DTH)
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Left, Lower Front Axle
- paired article number: V40-0504
- not for vehicle configuration line / variant: OPC, VXR
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 37
- Packaging height [cm]: 7
- Packaging Depth [cm]: 37
- Item number: V40-0505
- Manufacturer: VAICO
- EAN number: 4046001338342
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- Item number: 301181387500
- Manufacturer: MAGNETI MARELLI
- EAN number: 8001063894966
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- Item number: 301181387600
- Manufacturer: MAGNETI MARELLI
- EAN number: 8001063899107
- Condition: New
-
- Fitting Position: Front Axle Right, outer
- paired article number: TC1313
- Vehicle Equipment: for vehicles with additional noise suppression kit
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Right, Lower
- Length [mm]: 390
- Height [mm]: 70
- paired article number: TC1313
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 380
- Item number: TC1314
- Manufacturer: DELPHI
- EAN number: 5012759348901
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: 49615
- Required quantity: 1
- Item number: 49614
- Manufacturer: MAPCO
- EAN number: 4043605098696
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- paired article number: VKDS 325020 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 325019 B
- Manufacturer: SKF
- EAN number: 7316577897619
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 16
- Fitting Position: Front Axle Right, outer, Lower
- Length [mm]: 343
- paired article number: 210851
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,502
- Mounting Type: Hydro Mount
- as standard
- Item number: 210852
- Manufacturer: A.B.S.
- EAN number: 8717109349849
- Condition: New
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 16
- Fitting Position: Front Axle Left, outer, Lower
- Length [mm]: 343
- paired article number: 210852
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,488
- Mounting Type: Hydro Mount
- as standard
- Item number: 210851
- Manufacturer: A.B.S.
- EAN number: 8717109349832
- Condition: New
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Front Axle Left
- paired article number: VKDS 325019 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 325020 B
- Manufacturer: SKF
- EAN number: 7316577897626
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 16
- Fitting Position: Front Axle, Left, Lower
- Item number: D120323
- Manufacturer: DENCKERMANN
- EAN number: 2218610976148
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Right, Lower
- Item number: D120324
- Manufacturer: DENCKERMANN
- EAN number: 2218610976149
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower, Left
- paired article number: 5013634
- Net weight [kg]: 3,56
- Item number: 5013633
- Manufacturer: NK
- EAN number: 5703858823566
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower, Right
- paired article number: 5013633
- Net weight [kg]: 3,55
- Item number: 5013634
- Manufacturer: NK
- EAN number: 5703858823573
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: outer, Front Axle, Right, Lower
- paired article number: L24540
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,500
- Packaging length [cm]: 42
- Packaging width [cm]: 38
- Packaging height [cm]: 8
- Item number: L24539
- Manufacturer: MONROE
- EAN number: 5412096290039
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- Engine Code: Z17DTH
- Item number: 110162610
- Manufacturer: AUTOMEGA
- EAN number: 2232388418990
- Condition: New

- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 16
- Fitting Position: Front Axle Right
- Production Number: 4211530
- Item number: 4211530
- Manufacturer: KRAFT
- EAN number: 5901159139762
- Condition: New

- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- Production Number: 4211529
- Item number: 4211529
- Manufacturer: KRAFT
- EAN number: 5901159139755
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower
- Engine Code: Z17DTH
- Item number: 110162510
- Manufacturer: AUTOMEGA
- EAN number: 2232388418970
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- paired article number: 58004901
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- only in connection with: 55000518 / 5-S012
- Item number: 58004802
- Manufacturer: METZGER
- EAN number: 4250032437428
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower
- paired article number: 58004802
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- only in connection with: 55000518 / 5-S012
- Item number: 58004901
- Manufacturer: METZGER
- EAN number: 4250032437435
- Condition: New
- 1
- 2
- 3
- 4
- 5