OPEL Zafira C Tourer (P12) 2.0 CDTi Suspension arm (130 hp Diesel A 20 DT)
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- paired article number: S062857
- Item number: S061679
- Manufacturer: GSP
- EAN number: 221066812958962129589
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Left, Lower
- paired article number: S061679
- Item number: S062857
- Manufacturer: GSP
- EAN number: 221066815881390158813
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Front Axle Right
- paired article number: V40-1855
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 36,3
- Packaging height [cm]: 8,3
- Packaging Depth [cm]: 44
- Item number: V40-1854
- Manufacturer: VAICO
- EAN number: 4046001668579
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Front Axle Left
- paired article number: V40-1854
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 37
- Packaging height [cm]: 8,3
- Packaging Depth [cm]: 43,2
- Item number: V40-1855
- Manufacturer: VAICO
- EAN number: 4046001668937
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Fitting Position: outer
- paired article number: TC3738
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Right, Lower
- Length [mm]: 440
- Height [mm]: 82
- paired article number: TC3738
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 370
- Item number: TC3739
- Manufacturer: DELPHI
- EAN number: 5012759999295
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: outer
- paired article number: TC3739
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Left, Lower
- Length [mm]: 440
- Height [mm]: 82
- paired article number: TC3739
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 370
- Item number: TC3738
- Manufacturer: DELPHI
- EAN number: 5012759999301
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- paired article number: L24J09
- Required quantity: 1
- Weight [kg]: 3,289
- Packaging length [cm]: 44,5
- Packaging width [cm]: 32,6
- Packaging height [cm]: 11
- Item number: L24J10
- Manufacturer: MONROE
- EAN number: 5412096783807
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- paired article number: L24J10
- Required quantity: 1
- Weight [kg]: 3,289
- Packaging length [cm]: 44,5
- Packaging width [cm]: 32,6
- Packaging height [cm]: 11
- Item number: L24J09
- Manufacturer: MONROE
- EAN number: 5412096783784
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- paired article number: VKDS 325011 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Item number: VKDS 325010 B
- Manufacturer: SKF
- EAN number: 7316581950676
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- paired article number: 58107701
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Item number: 58107802
- Manufacturer: METZGER
- EAN number: 4062101010964
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Quality
- Fitting Position: Lower, outer, Front Axle Right
- paired article number: 616 050 0071 / HD
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Replace in pairs only
- Item number: 616 050 0070/HD
- Manufacturer: MEYLE
- EAN number: 4040074213773
- Condition: New
'Improved design for longer service life: MEYLE-HD parts 'Improved performance and service life: larger ball pin 4-year warranty on all MEYLE-HD parts. deliver enhanced durability. Compared to OE, MEYLE-HD is Engineered and quality approved in Germany. life: larger ball pin diameter of MEYLE-HD ball joint technically improved with reinforced inner parts, using distributes forces over a larger surface area and minimizes higher quality materials or optimized design solution. part wear.
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Quality
- Fitting Position: Lower, outer, Front Axle Left
- paired article number: 616 050 0070 / HD
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Replace in pairs only
- Item number: 616 050 0071/HD
- Manufacturer: MEYLE
- EAN number: 4040074224007
- Condition: New
'Improved design for longer service life: MEYLE-HD parts 'Improved performance and service life: larger ball pin 4-year warranty on all MEYLE-HD parts. deliver enhanced durability. Compared to OE, MEYLE-HD is Engineered and quality approved in Germany. life: larger ball pin diameter of MEYLE-HD ball joint technically improved with reinforced inner parts, using distributes forces over a larger surface area and minimizes higher quality materials or optimized design solution. part wear.
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- paired article number: 58107802
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Item number: 58107701
- Manufacturer: METZGER
- EAN number: 4062101010971
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Front Axle Right, outer, Lower
- Length [mm]: 356
- paired article number: 211645
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,192
- Mounting Type: Hydro Mount
- as standard
- Item number: 211646
- Manufacturer: A.B.S.
- EAN number: 8717109646665
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Right
- paired article number: 108820
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- Weight [kg]: 3,32
- Observe service information
- Item number: 108819
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224088197
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Left
- paired article number: 108819
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,32
- Observe service information
- Item number: 108820
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224088203
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT

- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Front Axle Left, Lower
- paired article number: 55782
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Required quantity: 1
- Item number: 55781
- Manufacturer: MAPCO
- EAN number: 4043605967442
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Front Axle Right, Lower
- paired article number: 55781
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Required quantity: 1
- Item number: 55782
- Manufacturer: MAPCO
- EAN number: 4043605967459
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Diameter [mm]: 356
- Fitting Position: outer, Front Axle Left, Lower, Front Axle
- paired article number: 8500 24561
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Article number of recommended accessories: 8500 24401 / 29411
- Item number: 8500 24562
- Manufacturer: TRISCAN
- EAN number: 5710476325907
- Condition: New
"See accessories list for bolt kit, bolts are not included"
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Front Axle Left
- paired article number: 51376
- Rod / Strut: Push Rod
- only in connection with: Ball joint+HYDRO SB
- Version: with HYDRO SB
- Item number: 51375
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978212804
- Condition: New
price incl. 19% VAT
- 1
- 2
- 3
- 4
- 5