Vehicle identification number: 3003AUH
Peugeot 2008 Estate 1.6 BlueHDi Suspension arm (120 hp Diesel BHZ (DV6FC))
-
- Fitting Position: Front Axle Left, outer, Lower
- Transmission Type: 6-Speed Automatic Transmission
- for RPO number up to: 14573
- Construction Year to: 10 / 2016
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 18
- Length [mm]: 331
- paired article number: 211057
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,199
- as standard
- Item number: 211056
- Manufacturer: A.B.S.
- EAN number: 8717109546248
- Condition: New
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, outer, Lower
- paired article number: SCA-10180
- Item number: SCA-10179
- Manufacturer: KAVO PARTS
- EAN number: 2220122290385
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, outer, Lower
- paired article number: SCA-10179
- Item number: SCA-10180
- Manufacturer: KAVO PARTS
- EAN number: 2220122290386
- Condition: New
-
- Fitting Position: Front Axle Left, Lower
- for RPO number up to: 14573
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- Length [mm]: 414
- paired article number: QSA2331S
- Width [mm]: 83
- Item number: QSA2330S
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438131437
- Condition: New
-
- Fitting Position: Front Axle Right, Lower
- for RPO number up to: 14573
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- Length [mm]: 414
- paired article number: QSA2330S
- Width [mm]: 83
- Item number: QSA2331S
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438131444
- Condition: New
Sample photo only
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower, outer
- paired article number: JTC3937
- Item number: JTC3936
- Manufacturer: TRW
- EAN number: 3322938529895
- Condition: New
-
- Construction Year from: 05 / 2015
- Transmission Code: BE4R
- Fitting Position: Lower, Front Axle Left
- Production number from: 14056
- Suspension: for vehicles with lifted suspension
- for DAM number from: 1310088
- Control / Trailing Arm Type: Control Arm
- Diameter [mm]: 72
- Length [mm]: 425
- paired article number: VKDS 323093 B
- Thread Size 1: M18
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Outer Diameter 2 [mm]: 82
- Item number: VKDS 323091 B
- Manufacturer: SKF
- EAN number: 7316579902663
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Cone Size [mm]: 18
- Fitting Position: Front Axle Right, outer, Lower
- Length [mm]: 331
- paired article number: 211272
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,328
- as standard
- Item number: 211273
- Manufacturer: A.B.S.
- EAN number: 8717109514759
- Condition: New
Important: Observe Fitting Instructions
-
- Vehicle configuration line / variant: AT6 AUT. TRANSM.
- for RPO number up to: 14573
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 18
- Fitting Position: Front Axle Left
- paired article number: 53275
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 53274
- Manufacturer: SIDEM
- EAN number: 5413978196937
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Lower, Front Axle Left
- paired article number: 37471
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,37
- Supplementary Article / Supplementary Info: with rubber mounts
- Transmission Type: Manual Transmission
- Observe service information
- Item number: 37470
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816374701
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Front Axle, outer, Right, Lower
- paired article number: ZWD-CT-022
- Joint Diameter [mm]: 18
- Fabrication Number: ZWD-CT-023
- Item number: ZWD-CT-023
- Manufacturer: NTY
- EAN number: 590204888336
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 18
- Supplementary Info: Original VAICO Quality
- Fitting Position: Right, Front Axle Right
- paired article number: V22-9521
- Suspension: for vehicles without standard suspension
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 30
- Packaging height [cm]: 8,5
- Packaging Depth [cm]: 51
- Item number: V22-9520
- Manufacturer: VAICO
- EAN number: 4046001521225
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Left, Lower Front Axle
- paired article number: V22-0375
- Suspension: for vehicles without standard suspension
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 40,1
- Packaging height [cm]: 7,5
- Packaging Depth [cm]: 42,6
- Item number: V22-0376
- Manufacturer: VAICO
- EAN number: 4046001645266
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Lower, Front Axle Right
- paired article number: 37470
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,37
- Supplementary Article / Supplementary Info: with rubber mounts
- Transmission Type: Manual Transmission
- Observe service information
- Item number: 37471
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816374718
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Right, Lower Front Axle
- paired article number: V22-0376
- Suspension: for vehicles without standard suspension
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 40,6
- Packaging height [cm]: 10,3
- Packaging Depth [cm]: 41,8
- Item number: V22-0375
- Manufacturer: VAICO
- EAN number: 4046001645259
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Fitting Position: Front Axle, Left, outer, Front Axle Left, Lower
- Suspension: for vehicles with heavy duty suspension
- Control / Trailing Arm Type: Control Arm
- Length [mm]: 327
- paired article number: L28567
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Weight [kg]: 3,300
- Packaging length [cm]: 43
- Packaging width [cm]: 40
- Packaging height [cm]: 9
- Item number: L28568
- Manufacturer: MONROE
- EAN number: 5412096489839
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Diameter [mm]: 18
- Fitting Position: Front Axle Right
- paired article number: G40.8109 / C
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Diameter 1 [mm]: 18
- Base body material: Steel
- Net weight [kg]: 3,21
- Item number: G40.8110/C
- Manufacturer: OMG SRL
- EAN number: 5904100810987
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Cone Size [mm]: 18
- Fitting Position: Front Axle Left, outer, Lower
- Length [mm]: 331
- paired article number: 211273
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,362
- as standard
- Item number: 211272
- Manufacturer: A.B.S.
- EAN number: 8717109514742
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Right, Lower
- Length [mm]: 316
- paired article number: L38526
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Weight [kg]: 3,500
- Packaging length [cm]: 43
- Packaging width [cm]: 41
- Packaging height [cm]: 9
- Item number: L38525
- Manufacturer: MONROE
- EAN number: 5412096427152
- Condition: New
-
- Fitting Position: Front Axle Left, outer
- paired article number: TC2984
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Left, Lower
- Length [mm]: 425
- Height [mm]: 82
- paired article number: TC2984
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 395
- Item number: TC2983
- Manufacturer: DELPHI
- EAN number: 5012759962596
- Condition: New
- 1
- 2
- 3
- 4
- 5