Vehicle identification number: 3333AWN
RENAULT Fluence (L3_) 1.5 dCi Suspension arm (90 hp Diesel K9K 834)
-
- paired article number: TC2356
- Fitting Position: outer
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower
- Length [mm]: 550
- Height [mm]: 90
- paired article number: TC2356
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 280
- Item number: TC2355
- Manufacturer: DELPHI
- EAN number: 5012759468760
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, outer, Lower
- Item number: JTARE-005L
- Manufacturer: AISIN
- EAN number: 5411450761932
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, outer, Lower
- Item number: JTARE-005R
- Manufacturer: AISIN
- EAN number: 5411450761949
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 17,3
- Fitting Position: Front Axle Left
- paired article number: V46-1197
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Axle alignment required after fitting
- Item number: V46-1196
- Manufacturer: VAICO
- EAN number: 4062375135349
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right
- paired article number: V46-1196
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Axle alignment required after fitting
- Item number: V46-1197
- Manufacturer: VAICO
- EAN number: 4062375135356
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 22
- Fitting Position: Front Axle Right, Lower
- paired article number: 177877
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,707
- Supplementary Article / Supplementary Info: with rubber mounts, with lock nut
- Observe service information
- External Thread Size: M12 x 1,25
- Item number: 178613
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224786130
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- Item number: 301181396000
- Manufacturer: MAGNETI MARELLI
- EAN number: 8001063856568
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- Item number: 301181396100
- Manufacturer: MAGNETI MARELLI
- EAN number: 8001063914633
- Condition: New
Sample photo only
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower, outer
- paired article number: JTC2267
- Item number: JTC2268
- Manufacturer: TRW
- EAN number: 3322938212773
- Condition: New
-
- Fitting Position: Lower, Front Axle Left
- Country Specific Design: Russia, Argentina
- Control / Trailing Arm Type: Control Arm
- paired article number: VKDS 326044 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 326043 B
- Manufacturer: SKF
- EAN number: 7316577897565
- Condition: New
-
- Fitting Position: Lower, Front Axle Right
- Country Specific Design: Argentina, Russia
- Control / Trailing Arm Type: Control Arm
- paired article number: VKDS 326043 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 326044 B
- Manufacturer: SKF
- EAN number: 7316577897589
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: 59141
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Item number: 59140
- Manufacturer: MAPCO
- EAN number: 4043605122308
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: 59140
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Item number: 59141
- Manufacturer: MAPCO
- EAN number: 4043605122315
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- Required quantity: 1
- Item number: SS7204
- Manufacturer: FAI AutoParts
- EAN number: 2226712115713
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- Required quantity: 1
- Item number: SS7205
- Manufacturer: FAI AutoParts
- EAN number: 2226712115714
- Condition: New
-
- Equipment Code: EQPARG, EQPEXP, EQPCOR, EQPRUS
- Construction Year to: 02 / 2010
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left
- paired article number: 700 796
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint, with nut
- Control / Trailing Arm Design: Triangular Control Arm
- Surface: Black-painted, Cathodic Painting
- Item number: 700 797
- Manufacturer: TOPRAN
- EAN number: 1819400000010
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
- Construction Year to: 02 / 2010
- Equipment Code: EQPCOR
-
- Equipment Code: EQPARG, EQPEXP, EQPRUS
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right
- paired article number: 700 797
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint, with nut
- Control / Trailing Arm Design: Triangular Control Arm
- Surface: Black-painted, Cathodic Painting
- Item number: 700 796
- Manufacturer: TOPRAN
- EAN number: 1868200000010
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 17,1
- Fitting Position: Front Axle Left, outer, Lower
- Length [mm]: 361
- paired article number: 211250
- Thread Size: M12X1,25 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,583
- as standard
- Item number: 211249
- Manufacturer: A.B.S.
- EAN number: 8717109503890
- Condition: New
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 17,1
- Fitting Position: Front Axle Right, outer, Lower
- Length [mm]: 361
- paired article number: 211249
- Thread Size: M12X1,25 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,553
- as standard
- Item number: 211250
- Manufacturer: A.B.S.
- EAN number: 8717109503883
- Condition: New
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 17,3
- Fitting Position: Front Axle Left, Lower
- Length [mm]: 431
- paired article number: QSA2544S
- Thread Size: M12x1,25
- Width [mm]: 94
- Item number: QSA2543S
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438279726
- Condition: New
- 1
- 2
- 3
- 4
- 5