Vehicle identification number: 3333ASX
Renault Grand Kangoo 1.5 dCi 90 Suspension arm (90 hp Diesel K9K 808)
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Front Axle Right
- paired article number: VKDS 326047 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 326048 B
- Manufacturer: SKF
- EAN number: 7316577898173
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower, outer
- paired article number: JTC2294
- Item number: JTC2293
- Manufacturer: TRW
- EAN number: 3322938212995
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- for OE number: 415 330 0300
- Item number: 02.31.199
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081021900
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle Left
- paired article number: V46-0330
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 40,1
- Packaging height [cm]: 8,3
- Packaging Depth [cm]: 41,7
- Item number: V46-0329
- Manufacturer: VAICO
- EAN number: 4046001476105
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: outer, Front Axle, Right, Lower
- paired article number: L25554
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Weight [kg]: 3,200
- Packaging length [cm]: 38
- Packaging width [cm]: 35
- Packaging height [cm]: 11
- Item number: L25553
- Manufacturer: MONROE
- EAN number: 5412096470196
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: 20-20719
- Weight [kg]: 3,37
- Item number: 20-20720
- Manufacturer: DYS
- EAN number: 224135139891121398911
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- Item number: 301181396600
- Manufacturer: MAGNETI MARELLI
- EAN number: 8001063957982
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- Item number: 301181396700
- Manufacturer: MAGNETI MARELLI
- EAN number: 8001063958231
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 20
- Fitting Position: Front Axle Left, outer, Lower
- Length [mm]: 343
- paired article number: 211248
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,371
- as standard
- Item number: 211247
- Manufacturer: A.B.S.
- EAN number: 8717109503913
- Condition: New
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 20
- Fitting Position: Front Axle Right
- paired article number: 172561
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,384
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- TecDoc Engine Number: K9K 808, K9K 628, K9K 608
- Item number: 172560
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224725603
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 20
- Fitting Position: Front Axle Left
- paired article number: 172560
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,384
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- TecDoc Engine Number: K9K 808, K9K 628, K9K 608
- Item number: 172561
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224725610
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- paired article number: ZWD-ME-053
- Fabrication Number: ZWD-ME-054
- Item number: ZWD-ME-054
- Manufacturer: NTY
- EAN number: 590204804386
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right
- paired article number: 700 826
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Control / Trailing Arm Design: Triangular Control Arm
- Surface: Black-painted, Cathodic Painting
- Item number: 700 827
- Manufacturer: TOPRAN
- EAN number: 1006360000017
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left
- paired article number: 700 827
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Control / Trailing Arm Design: Triangular Control Arm
- Surface: Black-painted, Cathodic Painting
- Item number: 700 826
- Manufacturer: TOPRAN
- EAN number: 1006350000010
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 20
- Fitting Position: Front Axle Right, outer, Lower
- Length [mm]: 343
- paired article number: 211247
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,371
- as standard
- Item number: 211248
- Manufacturer: A.B.S.
- EAN number: 8717109503906
- Condition: New
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Trailing Arm
- Fitting Position: Front Axle Right
- paired article number: KSC4183
- Item number: KSC4182
- Manufacturer: KYB
- EAN number: 2285227863010
- Condition: New
- Control / Trailing Arm Type: Trailing Arm
- Fitting Position: Front Axle Left
- paired article number: KSC4182
- Item number: KSC4183
- Manufacturer: KYB
- EAN number: 2285227863020
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower, outer
- paired article number: JTC2293
- Item number: JTC2294
- Manufacturer: TRW
- EAN number: 3322938223724
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Lower, Front Axle Left
- paired article number: 16-16 050 0046
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- replacement in pairs recommended
- Item number: 16-16 050 0045
- Manufacturer: MEYLE
- EAN number: 4040074038826
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Lower, Front Axle Right
- paired article number: 16-16 050 0045
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- replacement in pairs recommended
- Item number: 16-16 050 0046
- Manufacturer: MEYLE
- EAN number: 4040074038833
- Condition: New
- 1
- 2
- 3
- 4
- 5