Vehicle identification number: 3333BKB
Renault Megane 4 1.8 RS 300 Suspension arm (300 hp Petrol M5P 404)
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 22
- Fitting Position: Lower, Front Axle Left
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Vehicle configuration line / variant: PLUS KIT
- Rod / Strut: Push Rod
- Rim Size [inch]: 15, 17
- Item number: 273C2074
- Manufacturer: RIDEX
- EAN number: 4066016196935
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 22
- Fitting Position: Lower, Front Axle Left
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Mounting points diameter [mm]: 14,2
- Rod / Strut: Push Rod
- Rim Size [inch]: 15, 17
- Item number: SKCA-00560578
- Manufacturer: STARK
- EAN number: 4066016196928
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 22
- Fitting Position: Lower, Front Axle Right
- Length [mm]: 278
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Mounting points diameter [mm]: 14,3
- Rod / Strut: Push Rod
- Rim Size [inch]: 15, 17
- Item number: SKCA-00560579
- Manufacturer: STARK
- EAN number: 4066016196959
- Condition: New
-
- Fitting Position: Front Axle Left, outer, Lower
- Rim Size [inch]: 15.0, 16.0, 17.0
- Rim Size [inch]: 17
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 22
- Length [mm]: 335
- paired article number: 211877
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,865
- as standard
- Item number: 211876
- Manufacturer: A.B.S.
- EAN number: 8717109701975
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle Right, outer, Lower
- Rim Size [inch]: 15.0, 16.0, 17.0
- Rim Size [inch]: 17
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 22
- Length [mm]: 335
- paired article number: 211876
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,865
- as standard
- Item number: 211877
- Manufacturer: A.B.S.
- EAN number: 8717109702019
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle Left
- Manufacturer Restriction: Rim size 15", 17"
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- paired article number: RE-WP-15518
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 62
- Packaging width [cm]: 34,5
- Packaging height [cm]: 9
- Item number: RE-WP-15517
- Manufacturer: MOOG
- EAN number: 4060426218157
- Condition: New
-
- Fitting Position: Front Axle Right
- Manufacturer Restriction: Rim size 15", 17"
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- paired article number: RE-WP-15517
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 61,5
- Packaging width [cm]: 34,5
- Packaging height [cm]: 9
- Item number: RE-WP-15518
- Manufacturer: MOOG
- EAN number: 4060426218140
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle Right
- paired article number: V46-1122
- Weight [kg]: 3,85
- Tyre Size: 15"-17"
- Axle alignment required after fitting
- Packaging width [cm]: 25,8
- Packaging height [cm]: 7,8
- Packaging Depth [cm]: 54,4
- Item number: V46-1121
- Manufacturer: VAICO
- EAN number: 4046001956522
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- paired article number: G40.8239 / C
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Diameter 1 [mm]: 18
- Diameter 2 [mm]: 22
- Diameter 3 [mm]: 14,3
- Base body material: Steel
- Net weight [kg]: 3876
- Item number: G40.8240/C
- Manufacturer: OMG SRL
- EAN number: 5904100812103
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle Left
- paired article number: V46-1121
- Tyre Size: 15"-17"
- Axle alignment required after fitting
- Packaging width [cm]: 36,3
- Packaging height [cm]: 7,8
- Packaging Depth [cm]: 45
- Item number: V46-1122
- Manufacturer: VAICO
- EAN number: 4046001956560
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 22
- Fitting Position: Lower, Front Axle Left
- paired article number: 5471
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Rod / Strut: Push Rod
- only in connection with: BJ + Bolt + nut M10
- Rim Size [inch]: 15,0, 17,0
- Item number: 5470
- Manufacturer: SIDEM
- EAN number: 5413978265015
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 22
- Fitting Position: Lower, Front Axle Right
- paired article number: 5470
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Rod / Strut: Push Rod
- only in connection with: BJ + Bolt + nut M10
- Rim Size [inch]: 15,0, 17,0
- Item number: 5471
- Manufacturer: SIDEM
- EAN number: 5413978265022
- Condition: New
-
- Fitting Position: Front Axle Left, outer, Lower
- Rim Size [inch]: 18.0
- Rim Size [inch]: 18
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Cone Size [mm]: 22
- Length [mm]: 335
- paired article number: 211993
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 5,87
- Mounting Type: Hydro Mount
- as standard
- Item number: 211992
- Manufacturer: A.B.S.
- EAN number: 8717109732870
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 22
- Fitting Position: Lower, Front Axle Left
- paired article number: 59477
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Rod / Strut: Push Rod
- only in connection with: BJ + Bolt + nut M10
- Rim Size [inch]: 15,0, 17,0
- Item number: 59476
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978838059
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 22
- Fitting Position: Lower, Front Axle Right
- paired article number: 59476
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Rod / Strut: Push Rod
- only in connection with: BJ + Bolt + nut M10
- Rim Size [inch]: 15,0, 17,0
- Item number: 59477
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978838066
- Condition: New
-
- Fitting Position: Front Axle Left
- Manufacturer Restriction: Rim size 15", 17"
- Control / Trailing Arm Type: Control Arm
- paired article number: L25585
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Weight [kg]: 4,250
- Packaging length [cm]: 46
- Packaging width [cm]: 43
- Packaging height [cm]: 10
- Item number: L25586
- Manufacturer: MONROE
- EAN number: 5412096735981
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- Weight [kg]: 3,766
- Outer Diameter 2 [mm]: 22
- Item number: 96-09217-1
- Manufacturer: RTS
- EAN number: 8435130365262
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower
- Weight [kg]: 3,766
- Outer Diameter 2 [mm]: 22
- Item number: 96-09217-2
- Manufacturer: RTS
- EAN number: 8435130365279
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Front Axle Right
- paired article number: S062794
- Item number: S062795
- Manufacturer: GSP
- EAN number: 2237315881374
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Front Axle Left
- paired article number: S062795
- Item number: S062794
- Manufacturer: GSP
- EAN number: 2237315881373
- Condition: New
- 1
- 2
- 3
- 4