RENAULT Safrane II (A3_, L7_) 2.3 Suspension arm (170 hp Petrol VQ23DE)
- Control / Trailing Arm Type: Control Arm
- Material: Cast Iron
- Cone Size [mm]: 14,2
- Diameter [mm]: 38
- Fitting Position: Front Axle Right
- paired article number: 5676
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 5677
- Manufacturer: SIDEM
- EAN number: 5413978129928
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Iron
- Cone Size [mm]: 14,2
- Diameter [mm]: 38
- Fitting Position: Front Axle Right
- paired article number: 50207
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 50208
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978838981
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Right, Lower Front Axle
- paired article number: V46-9538
- Colour: black
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 11,5
- Packaging height [cm]: 9
- Packaging Depth [cm]: 54
- Item number: V46-9540
- Manufacturer: VAICO
- EAN number: 4046001409448
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Required quantity: 2
- Brake Type: Disc Brake
- Diameter [mm]: 300, 62
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 11
- Height [mm]: 81,7
- Rim Hole Number: 5
- Inner Diameter [mm]: 30
- Width [mm]: 48
- Supplementary Article / Supplementary Info Info 2: with integrated wheel bearing, with integrated magnetic sensor ring
- Drilled: no
- Item number: VKBD 1030
- Manufacturer: SKF
- EAN number: 7316575919726
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator
- Thickness [mm]: 18
- Fitting Position: Front Axle
- Height 1 [mm]: 63
- Height 2 [mm]: 68
- Width [mm]: 155,1
- WVA Number: 24710
- Weight [kg]: 1,9
- Article number of recommended accessories: 82076800
- Packaging length [cm]: 17
- Packaging width [cm]: 12
- Packaging height [cm]: 8,3
- Item number: 2471001
- Our price: 38,04 €
- Manufacturer: TEXTAR
- EAN number: 4019722305214
- Condition: New
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator
- Thickness [mm]: 18
- Fitting Position: Front Axle
- Height 1 [mm]: 63
- Height 2 [mm]: 68
- Width [mm]: 155,1
- WVA Number: 24710
- Weight [kg]: 1,9
- Article number of recommended accessories: 8DZ 355 201-371
- Assy. / disassy. by qualified personnel required!
- Item number: 8DB 355 014-591
- Our price: 39,66 €
- Manufacturer: HELLA
- EAN number: 4082300358902
- Condition: New
- Diameter [mm]: 300
- Brake Disc Type: solid
- Product line: PRO
- Brake Disc Thickness [mm]: 11
- Fitting Position: Rear Axle
- Height [mm]: 83,5
- Surface: Coated
- Centering Diameter [mm]: 61,9
- Hole Arrangement / Number: 05 / 05
- Wheel Bolt Bore Diameter [mm]: 14
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 9,5
- Inner Diameter [mm]: 142
- Stub Axle Diameter [mm]: 30
- Weight [kg]: 8,1
- Supplementary Article / Supplementary Info: with axle nut
- Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring, with wheel bearing, without wheel studs, with wheel hub
- Packaging length [cm]: 31,3
- Packaging width [cm]: 31,3
- Packaging height [cm]: 10
- Drilled: no
- Item number: 92233103
- Manufacturer: TEXTAR
- EAN number: 4019722482984
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Brake System: ATE
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 18
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: without accessories
- Height 1 [mm]: 63
- Height 2 [mm]: 68
- Width [mm]: 155
- WVA Number: 24710, 24826
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Item number: P 68 047X
- Our price: 58,11 €
- Manufacturer: BREMBO
- EAN number: 8020584069189
- Condition: New
Brembo Xtra: the perfect brake pad for Brembo Xtra and Brembo Max brake discs.
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 18
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 63
- Height 2 [mm]: 68
- Width [mm]: 155
- WVA Number: 24710, 24826
- Supplementary Article / Supplementary Info Info 2: with piston clip, with anti-squeak plate
- Item number: P 68 047
- Our price: 27,00 €
- Manufacturer: BREMBO
- EAN number: 8020584061985
- Condition: New
- Diameter [mm]: 300
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 11
- Fitting Position: Left, Rear Axle
- Number of Holes: 5
- Minimum thickness [mm]: 9
- Inner Diameter 2 [mm]: 30
- Tightening Torque [Nm]: 280
- Mounting points diameter [mm]: 14
- Width 1 [mm]: 81
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with rolling bearing
- Article number of the recommended special tool: Clas : OM4217, Clas : OM8154, Clas : OM 4217
- Drilled: no
- Item number: KF155.90U
- Manufacturer: SNR
- EAN number: 3413520968281
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 16
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: without accessories
- Height [mm]: 51
- Width 2 [mm]: 51
- Width 1 [mm]: 123
- WVA Number: 25265, 25266
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Item number: P 68 057
- Our price: 28,81 €
- Manufacturer: BREMBO
- EAN number: 8020584103722
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 296
- Brake Disc Type: Externally Vented
- Product line: PRO
- Brake Disc Thickness [mm]: 26
- Fitting Position: Front Axle
- Height [mm]: 43,9
- Surface: Coated
- Centering Diameter [mm]: 68
- Hole Arrangement / Number: 05 / 07
- Wheel Bolt Bore Diameter [mm]: 15,9
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 23,4
- Inner Diameter [mm]: 148
- Weight [kg]: 7,8
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 30,8
- Packaging width [cm]: 30,8
- Packaging height [cm]: 12,7
- Drilled: no
- Item number: 92195603
- Manufacturer: TEXTAR
- EAN number: 4019722403811
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator
- Thickness [mm]: 16,2
- Fitting Position: Rear Axle
- Height 1 [mm]: 50,6
- Height 2 [mm]: 50,5
- Width 2 [mm]: 123,2
- Width 1 [mm]: 123,1
- WVA Number: 25265
- Weight [kg]: 1,409
- Article number of recommended accessories: 82503500
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Item number: 2526501
- Our price: 38,20 €
- Manufacturer: TEXTAR
- EAN number: 4019722431517
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator
- Thickness [mm]: 16,2
- Fitting Position: Rear Axle
- Height 1 [mm]: 50,6
- Height 2 [mm]: 50,5
- Width 2 [mm]: 123,2
- Width 1 [mm]: 123,1
- WVA Number: 25265
- Weight [kg]: 1,409
- Article number of recommended accessories: 8DZ 355 201-501
- Assy. / disassy. by qualified personnel required!
- Item number: 8DB 355 017-341
- Our price: 41,21 €
- Manufacturer: HELLA
- EAN number: 4082300361650
- Condition: New