Renault Trafic FL 2.5 dCi Suspension arm (114 hp Diesel G9U 630)
- Control / Trailing Arm Type: Control Arm
- Material: Cast Iron
- Cone Size [mm]: 18
- Fitting Position: Front Axle Right
- paired article number: 6176
- Vehicle configuration line / variant: REINFORCED
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 6177
- Manufacturer: SIDEM
- EAN number: 5413978210442
- Condition: New
price incl. 19% VAT
excl. delivery costs


- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, outer, Lower
- paired article number: SCA-10371
- Item number: SCA-10370
- Manufacturer: KAVO PARTS
- EAN number: 2220122290569
- Condition: New


- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, outer, Lower
- paired article number: SCA-10370
- Item number: SCA-10371
- Manufacturer: KAVO PARTS
- EAN number: 2220122290570
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: 60 93 6345
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 6,960
- Supplementary Article / Supplementary Info: with rubber mounts
- Item number: 60 93 6346
- Manufacturer: SWAG
- EAN number: 4044688567796
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: 60 93 6346
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 6,960
- Supplementary Article / Supplementary Info: with lock nut, with rubber mounts
- Item number: 60 93 6345
- Manufacturer: SWAG
- EAN number: 4044688567789
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Right, Lower
- paired article number: RE-WP-7761
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 51
- Packaging width [cm]: 44,5
- Packaging height [cm]: 15
- Item number: RE-WP-7760
- Manufacturer: MOOG
- EAN number: 4044197559312
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Left, Lower
- paired article number: RE-WP-7760
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 51
- Packaging width [cm]: 44,5
- Packaging height [cm]: 15
- Item number: RE-WP-7761
- Manufacturer: MOOG
- EAN number: 4044197559411
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower, outer
- paired article number: 8500 10569
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Mounting points diameter [mm]: 12
- Article number of recommended accessories: 8500 10413
- Item number: 8500 10570
- Manufacturer: TRISCAN
- EAN number: 5710476014924
- Condition: New
"See accessories list for bolt kit, bolts are not included"
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Left
- Axle alignment required after fitting
- Item number: A38-1151
- Manufacturer: ACKOJA
- EAN number: 4046001950902
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower
- paired article number: S060632
- Item number: S060631
- Manufacturer: GSP
- EAN number: 2237314569720
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- paired article number: S060631
- Item number: S060632
- Manufacturer: GSP
- EAN number: 2237314569721
- Condition: New

- Control / Trailing Arm Type: Control Arm
- Material: Grey Cast Iron
- Fitting Position: Front Axle Left
- paired article number: 40-00770
- Weight [kg]: 7,46
- Specification: 2006->
- Item number: 40-00771
- Manufacturer: TALOSA
- EAN number: 8435229545766
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 17,8
- Fitting Position: Front Axle Left, outer, Lower
- Length [mm]: 406
- paired article number: 211259
- Thread Size: M16X1,5 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 6,748
- as standard
- Item number: 211258
- Manufacturer: A.B.S.
- EAN number: 8717109509557
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Left
- Weight [kg]: 3,358
- Item number: SA-N612L
- Manufacturer: 555
- EAN number: 4582447028503
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Right
- Weight [kg]: 3,358
- Item number: SA-N612R
- Manufacturer: 555
- EAN number: 4582447028497
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Diameter [mm]: 15
- Fitting Position: Right Front
- Overall Height [mm]: 85
- External Thread [mm]: M16X1,5
- Inner Diameter [mm]: 18
- Fitted Diameter [mm]: 18
- Item number: 72132R
- Manufacturer: JAPKO
- EAN number: 8033001849721
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Left
- paired article number: 821 0822 10
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Item number: 821 0821 10
- Manufacturer: FAG
- EAN number: 4014870414207
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Right
- paired article number: 821 0821 10
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Item number: 821 0822 10
- Manufacturer: FAG
- EAN number: 4014870414214
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Left Front
- Overall Height [mm]: 86
- External Thread [mm]: 16X1,5
- Inner Diameter [mm]: 18
- Fitted Diameter [mm]: 18
- Inner Diameter 2 [mm]: 15
- Item number: 72132L
- Manufacturer: JAPKO
- EAN number: 8033001849691
- Condition: New

- Control / Trailing Arm Type: Control Arm
- Material: Grey Cast Iron
- Fitting Position: Front Axle Right
- paired article number: 40-00771
- Weight [kg]: 7,46
- Specification: 2006->
- Item number: 40-00770
- Manufacturer: TALOSA
- EAN number: 8435229545759
- Condition: New
- 1
- 2
- 3
- 4
- 5