TOYOTA Corolla IX Saloon (E120) 2.0 D-4D Suspension arm (90 hp Diesel 1CD-FTV)
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Front Axle Right
- Item number: S060744
- Manufacturer: GSP
- EAN number: 2237313923303
- Condition: New
-
- Construction Year to: 09 / 2002
- Fitting Position: Lower, Front Axle Right
- Control / Trailing Arm Type: Control Arm
- paired article number: VKDS 821097 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Item number: VKDS 821084 B
- Manufacturer: SKF
- EAN number: 7316579636889
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Front Axle Left
- paired article number: VKDS 821064
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Hole Spacing 1 / Hole Spacing 2: 359
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 821063
- Manufacturer: SKF
- EAN number: 7316579255837
- Condition: New
price incl. 19% VAT
excl. delivery costs

- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Left
- paired article number: 69SKV132
- Weight [kg]: 3
- Always compare old and new part (in particular OE No.)
- Item number: 69SKV131
- Manufacturer: ESEN SKV
- EAN number: 5903968488147
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 15
- Fitting Position: Front Axle, Right, Lower
- Length [mm]: 360
- External Thread [mm]: M14 x 1,50 RHT M
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Fitted Diameter [mm]: 15
- Width [mm]: 361
- Inner Diameter 2 [mm]: 14
- Item number: SKCA-0050177
- Manufacturer: STARK
- EAN number: 4059191054138
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 15
- Fitting Position: Front Axle, outer, Lower, Left, Front Axle Left
- Length [mm]: 360
- Cone Pitch: 1 / 6
- Weight [kg]: 4,12
- Width [mm]: 361
- Inner Diameter 2 [mm]: 14
- Item number: SKCA-0050903
- Manufacturer: STARK
- EAN number: 4059191494682
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Transmission Code: MT
- Left- / right-hand drive vehicles: for left-hand drive vehicles
- Vehicle Production Country: Europe
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Right Front
- Item number: 72-6199
- Manufacturer: MAXGEAR
- EAN number: 5905141938609
- Condition: New
-
- Transmission Code: MT
- Left- / right-hand drive vehicles: for left-hand drive vehicles
- Vehicle Production Country: Europe
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Left Front
- Item number: 72-6198
- Manufacturer: MAXGEAR
- EAN number: 5905141938593
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Front Axle Left, Lower
- Vehicle Production Country: Japan
- Control / Trailing Arm Type: Control Arm
- paired article number: 5014516
- Net weight [kg]: 3,17
- Item number: 5014515
- Manufacturer: NK
- EAN number: 5703858804787
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle Right, Lower
- Vehicle Production Country: Japan
- Control / Trailing Arm Type: Control Arm
- paired article number: 5014515
- Net weight [kg]: 3,15
- Item number: 5014516
- Manufacturer: NK
- EAN number: 5703858804794
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: JTC1865
- Item number: JTC1864
- Manufacturer: TRW
- EAN number: 3322938328115
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: JTC1864
- Item number: JTC1865
- Manufacturer: TRW
- EAN number: 3322938328122
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right
- Colour: black
- Axle alignment required after fitting
- Item number: A70-1167
- Manufacturer: ACKOJA
- EAN number: 4046001951756
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Vehicle Identification Number (VIN): SB1****
-
- Vehicle Identification Number (VIN): JT
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- paired article number: ADT386195
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 0,001
- Supplementary Article / Supplementary Info: with rubber mounts
- Item number: ADT386196
- Manufacturer: BLUE PRINT
- EAN number: 5050063128956
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- paired article number: 58080402
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Item number: 58080301
- Manufacturer: METZGER
- EAN number: 4250032605858
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- paired article number: 58080301
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Item number: 58080402
- Manufacturer: METZGER
- EAN number: 4250032605841
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Left
- paired article number: TO-WP-2235
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 61,2
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8,8
- Item number: TO-WP-2234
- Manufacturer: MOOG
- EAN number: 4044197334025
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Right
- paired article number: TO-WP-2234
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 61,2
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8,8
- Item number: TO-WP-2235
- Manufacturer: MOOG
- EAN number: 4044197334032
- Condition: New
-
- Construction Year from: 09 / 2002
- Fitting Position: Lower, Front Axle Right
- Control / Trailing Arm Type: Control Arm
- paired article number: VKDS 821063
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Hole Spacing 1 / Hole Spacing 2: 359
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 821064
- Manufacturer: SKF
- EAN number: 7316579255844
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 15
- Fitting Position: Front Axle Right, outer, Lower
- paired article number: 210551
- Thread Size: M14X1,5 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,944
- as standard
- Item number: 210552
- Manufacturer: A.B.S.
- EAN number: 8717109315288
- Condition: New
Important: Observe Fitting Instructions
- 1
- 2
- 3
- 4
- 5