TOYOTA Corolla X Saloon (E150) 2.0 D-4D Suspension arm (126 hp Diesel 1AD-FTV)
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 21
- Fitting Position: Lower Front Axle, outer, Right, Front Axle Right
- Length [mm]: 279
- Cone Pitch: 1 / 6
- Thread Size 1: M14x1,5
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Supplementary Article / Supplementary Info: with accessories
- Item number: 273C0906
- Manufacturer: RIDEX
- EAN number: 4059191725625
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Front Axle, outer, Right, Lower
- paired article number: ZWD-TY-159
- Fabrication Number: ZWD-TY-158
- Item number: ZWD-TY-158
- Manufacturer: NTY
- EAN number: 5908281469507
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 21
- Fitting Position: Lower Front Axle, outer, Left, Front Axle Left
- Length [mm]: 279
- Cone Pitch: 1 / 6
- Thread Size 1: M14x1,5
- Supplementary Article / Supplementary Info: with accessories
- Inner Diameter 2 [mm]: 16
- Item number: SKCA-0050910
- Manufacturer: STARK
- EAN number: 4059191494774
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: outer, Left, Lower Front Axle
- Axle alignment required after fitting
- Item number: A70-1165
- Manufacturer: ACKOJA
- EAN number: 4046001951749
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: outer, Right, Lower Front Axle
- Axle alignment required after fitting
- Item number: A70-1166
- Manufacturer: ACKOJA
- EAN number: 4046001952135
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, outer, Lower
- paired article number: SCA-9072
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Item number: SCA-9071
- Manufacturer: KAVO PARTS
- EAN number: 8715616142458
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left
- paired article number: 600 572
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Control / Trailing Arm Design: Triangular Control Arm
- Surface: Black-painted, Cathodic Painting
- Item number: 600 571
- Manufacturer: TOPRAN
- EAN number: 1316140000015
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right
- paired article number: 600 571
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Control / Trailing Arm Design: Triangular Control Arm
- Surface: Black-painted, Cathodic Painting
- Item number: 600 572
- Manufacturer: TOPRAN
- EAN number: 1316150000012
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Left
- paired article number: TO-WP-8426
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 51
- Packaging width [cm]: 44,5
- Packaging height [cm]: 15
- Item number: TO-WP-8425
- Manufacturer: MOOG
- EAN number: 4044197645534
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Right
- paired article number: TO-WP-8425
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 51
- Packaging width [cm]: 44,5
- Packaging height [cm]: 15
- Item number: TO-WP-8426
- Manufacturer: MOOG
- EAN number: 4044197645541
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Front Axle Left, Rear Axle Left
- paired article number: S061123
- Item number: S061122
- Manufacturer: GSP
- EAN number: 2237313923379
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right
- paired article number: 174164
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 4,36
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Item number: 174163
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224741634
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Front Axle Right, Rear Axle Left
- paired article number: S061122
- Item number: S061123
- Manufacturer: GSP
- EAN number: 2237313923380
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left
- paired article number: 174163
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 4,36
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Item number: 174164
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224741641
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle Right, outer
- paired article number: TC2282
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Right, Lower
- Length [mm]: 450
- Height [mm]: 105
- paired article number: TC2282
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 410
- Item number: TC2283
- Manufacturer: DELPHI
- EAN number: 5012759460269
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower
- Overall Height [mm]: 88
- External Thread [mm]: 14X1,5
- Inner Diameter [mm]: 16
- Fitted Diameter [mm]: 18
- Inner Diameter 2 [mm]: 16
- Item number: 72-02-254L
- Manufacturer: ASHIKA
- EAN number: 8033001851908
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- Overall Height [mm]: 88
- External Thread [mm]: 14X1,5
- Inner Diameter [mm]: 16
- Fitted Diameter [mm]: 18
- Inner Diameter 2 [mm]: 16
- Item number: 72-02-254R
- Manufacturer: ASHIKA
- EAN number: 8033001851939
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Front Axle, Lower Left
- Length [mm]: 318
- Supplementary Article / Supplementary Info: with bush
- Packaging width [cm]: 49,5
- Packaging height [cm]: 16
- Gross Weight [g]: 5400
- Item number: CQ0312L
- Manufacturer: CTR
- EAN number: 8806199137778
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right
- paired article number: ADBP860023
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 4,36
- Supplementary Article / Supplementary Info: with rubber mounts
- Item number: ADBP860022
- Manufacturer: BLUE PRINT
- EAN number: 5057746243494
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle Left, outer
- paired article number: TC2283
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Left, Lower
- Length [mm]: 450
- Height [mm]: 105
- paired article number: TC2283
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 410
- Item number: TC2282
- Manufacturer: DELPHI
- EAN number: 5012759460221
- Condition: New
- 1
- 2
- 3
- 4
- 5