Fortuner 2.5 D-4D Suspension arm (144 hp Diesel 2KD-FTV)

- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Upper
- paired article number: 4840101280
- Item number: 4840101270
- Manufacturer: JP GROUP
- EAN number: 5714670509798
- Condition: New

- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Upper
- paired article number: 4840101270
- Item number: 4840101280
- Manufacturer: JP GROUP
- EAN number: 5714670509781
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Upper, Left Front
- Left- / right-hand drive vehicles: for left-hand drive vehicles
- Item number: 72-6139
- Manufacturer: MAXGEAR
- EAN number: 5905141938005
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Right Front, Upper
- Left- / right-hand drive vehicles: for left-hand drive vehicles
- Item number: 72-6140
- Manufacturer: MAXGEAR
- EAN number: 5905141938012
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 18
- Fitting Position: Upper, Front Axle Right
- paired article number: 72-6258
- Supplementary Article / Supplementary Info Info 2: with bearing(s), with ball joint, with crown nut
- Item number: 72-6259
- Manufacturer: MAXGEAR
- EAN number: 5905141955422
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Left, Upper Front Axle
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Axle alignment required after fitting
- Item number: A70-1184
- Manufacturer: ACKOJA
- EAN number: 4046001951213
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 15
- Fitting Position: Upper, Front Axle Right
- paired article number: S061451
- Thread Size 1: M14X1,5
- Item number: S061450
- Manufacturer: GSP
- EAN number: 6928536153950
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Upper
- paired article number: 58125902
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Item number: 58125801
- Manufacturer: METZGER
- EAN number: 4062101082473
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 18
- Fitting Position: Upper, Front Axle Right
- paired article number: 175306
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 2,683
- Supplementary Article / Supplementary Info: with rubber mounts, with crown nut and split pin
- Observe service information
- External Thread Size: M14 x 1,5
- Item number: 175305
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224753057
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Upper
- paired article number: 58125801
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Item number: 58125902
- Manufacturer: METZGER
- EAN number: 4062101082480
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Suspension material: Sheet Steel
- Fitting Position: Upper, Front Axle Left
- paired article number: VKDS 821079 B
- Thread Size 1: M14z1,5
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Inner Diameter [mm]: 15
- Supplementary Article / Supplementary Info: with synthetic grease
- Item number: VKDS 821080 B
- Manufacturer: SKF
- EAN number: 7316579636940
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Suspension material: Sheet Steel
- Fitting Position: Upper, Front Axle Right
- paired article number: VKDS 821080 B
- Thread Size 1: M14z1,5
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Inner Diameter [mm]: 15
- Supplementary Article / Supplementary Info: with synthetic grease
- Item number: VKDS 821079 B
- Manufacturer: SKF
- EAN number: 7316579636957
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 18
- Fitting Position: Front Axle Left, Upper
- paired article number: 175305
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 2,683
- Supplementary Article / Supplementary Info: with crown nut and split pin, with rubber mounts
- Observe service information
- External Thread Size: M14 x 1,5
- Item number: 175306
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224753064
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 18
- Fitting Position: Upper, Front Axle Right
- paired article number: ADBP860045
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 2,683
- Supplementary Article / Supplementary Info: with rubber mounts, with crown nut and split pin
- External Thread Size: M14 x 1,5
- Item number: ADBP860044
- Manufacturer: BLUE PRINT
- EAN number: 5057746260897
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 18
- Fitting Position: Front Axle Left, Upper
- paired article number: ADBP860044
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 2,683
- Supplementary Article / Supplementary Info: with crown nut and split pin, with rubber mounts
- External Thread Size: M14 x 1,5
- Item number: ADBP860045
- Manufacturer: BLUE PRINT
- EAN number: 5057746260903
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Left Front, Upper
- Weight [kg]: 2,485
- Production date from: 201107
- Packaging length [cm]: 28,0
- Packaging width [cm]: 23,0
- Packaging height [cm]: 6,0
- Item number: 0124-LC120LH
- Manufacturer: FEBEST
- EAN number: 4056111049076
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 18
- Fitting Position: Upper, Front Axle Right
- paired article number: 33 10 7257
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 2,683
- Supplementary Article / Supplementary Info: with crown nut and split pin, with rubber mounts
- External Thread Size: M14 x 1,5
- Item number: 33 10 7255
- Manufacturer: SWAG
- EAN number: 4054228753053
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Lower Left
- Length [mm]: 446
- paired article number: CQ0318R
- Supplementary Article / Supplementary Info: with bush
- Packaging length [cm]: 49,5
- Packaging width [cm]: 49,5
- Packaging height [cm]: 16
- Gross Weight [g]: 9200
- Item number: CQ0318L
- Manufacturer: CTR
- EAN number: 224401179352861793528
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Lower Right
- Length [mm]: 446
- paired article number: CQ0318L
- Supplementary Article / Supplementary Info: with bush
- Packaging length [cm]: 49,5
- Packaging width [cm]: 49,5
- Packaging height [cm]: 16
- Gross Weight [g]: 9200
- Item number: CQ0318R
- Manufacturer: CTR
- EAN number: 224401179352871793528
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Right, Front Axle, Upper
- paired article number: G6-1590
- External Thread [mm]: M14 x 1,50 RHT M
- Internal Thread [mm]: M8 x 1,25 RHT F
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Mounting points diameter [mm]: 15,1
- Bore Diameter [mm]: 7,2
- Cone Size 1 [mm]: 15
- Cone Size 2 [mm]: 18
- Item number: G6-1591
- Manufacturer: OPTIMAL
- EAN number: 4058787044775
- Condition: New
price incl. 19% VAT
- 1
- 2