Vehicle identification number: 0603374
Golf 4 Cabrio 1.8 Suspension arm (90 hp Petrol ANP)
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Lower, Front Axle Right, Front Axle Left
- Length [mm]: 346
- Supplementary Article / Supplementary Info Info 2: without ball joint, with rubber mount
- Inner Diameter [mm]: 17
- Item number: 273C0704
- Manufacturer: RIDEX
- EAN number: 4059191694150
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 19
- Fitting Position: Front Axle, Left, Lower
- Length [mm]: 392
- Item number: 273C0400
- Manufacturer: RIDEX
- EAN number: 4059191207367
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 19
- Fitting Position: Front Axle Right
- Length [mm]: 392
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with bush
- Item number: 273C0397
- Manufacturer: RIDEX
- EAN number: 4059191331840
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Required quantity: 1
- Control / Trailing Arm Type: Control Arm
- Item number: 772S0146
- Manufacturer: RIDEX
- EAN number: 4059191855544
- Condition: New
- Supplementary Article / Supplementary Info Info 2: with fastening material, with coupling rod
- Fitting Position: Front axle both sides, Lower
- Required quantity: 1
- Control / Trailing Arm Type: Control Arm
- Item number: 772S0167
- Manufacturer: RIDEX
- EAN number: 4064138040648
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 19
- Fitting Position: Front axle both sides, Lower
- Item number: RH04-0050
- Manufacturer: REINHOCH
- EAN number: 5901655171532
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Lower, Front Axle
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Weight [kg]: 1,98
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 33
- Packaging height [cm]: 4
- Packaging Depth [cm]: 37
- Item number: V10-7072
- Manufacturer: VAICO
- EAN number: 4046001186875
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle Right, Front Axle Left, Lower
- Supplementary Article / Supplementary Info Info 2: without ball joint, with rubber mount
- Required quantity: 2
- replacement in pairs recommended
- Item number: 116 050 8254
- Manufacturer: MEYLE
- EAN number: 4040074147078
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Front Axle Left, Front Axle Right, outer
- paired article number: 210707
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Weight [kg]: 2,853
- as standard
- Item number: 210707
- Manufacturer: A.B.S.
- EAN number: 8717109337792
- Condition: New
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Lower, Front Axle
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38
- Packaging height [cm]: 5,5
- Packaging Depth [cm]: 42
- Item number: V10-7202
- Manufacturer: VAICO
- EAN number: 4046001305320
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 2,760
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Item number: 01800
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816018001
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower Front Axle, both sides
- Item number: 49400660
- Manufacturer: CORTECO
- EAN number: 3358960652799
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: both sides, Front Axle
- Item number: RH04-0035
- Manufacturer: REINHOCH
- EAN number: 5901655169454
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Front Axle Right, Lower, both sides
- Item number: JTC340
- Manufacturer: TRW
- EAN number: 3322937904396
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 19
- Fitting Position: Front Axle, Left, Lower
- Length [mm]: 392
- Item number: SKCA-0050398
- Manufacturer: STARK
- EAN number: 4059191076871
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Right, Left, Lower, Front
- Length [mm]: 454
- paired article number: TC767
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 52
- Item number: TC766
- Manufacturer: DELPHI
- EAN number: 5012759091685
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Lower Front Axle, Left, Right
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint, without bearing
- Weight [kg]: 2,8
- Always compare old and new part (in particular OE No.)
- Item number: 69SKV837
- Manufacturer: ESEN SKV
- EAN number: 5906302226078
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 2,76
- Supplementary Article / Supplementary Info: with rubber mounts
- Item number: 30 73 0001
- Manufacturer: SWAG
- EAN number: 4044688504777
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Rear Axle Left, Rear Axle Right
- Length [mm]: 520
- Weight [kg]: 1,08
- Item number: 26-21720
- Manufacturer: DYS
- EAN number: 8435229571123
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, both sides
- Item number: 49398710
- Manufacturer: CORTECO
- EAN number: 3358960633279
- Condition: New
- 1
- 2
- 3
- 4
- 5