Passat 3a5 1.8 Suspension arm (112 hp Petrol PB)
- Control / Trailing Arm Type: Control Arm
- Suspension material: Sheet Steel
- Vehicle Identification Number (VIN) from: 31-N-250-990
- Cone Size [mm]: 16.5
- Fitting Position: Front Axle Left
- Cone Pitch: 1 / 10
- Item number: 273C0231
- Manufacturer: RIDEX
- EAN number: 4059191647101
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front axle both sides, Lower
- Weight [kg]: 3,042
- Item number: 273C0328
- Manufacturer: RIDEX
- EAN number: 4059191666003
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Vehicle Identification Number (VIN) from: 31-N-250-990
- Fitting Position: Right, Lower Front Axle
- Length [mm]: 450
- Height [mm]: 120
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,295
- Width [mm]: 380
- Item number: 273C0282
- Manufacturer: RIDEX
- EAN number: 4059191409921
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Supplementary Article / Supplementary Info Info 2: with lock screw set, with ball joint
- Quantity Unit: Set
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Control / Trailing Arm Type: Control Arm
- Required quantity: 1
- Item number: 2905L0032
- Our price: 80,37 €
- Manufacturer: RIDEX
- EAN number: 4064138143325
- Condition: New
- Fitting Position: Front, Front Axle
- Inner Diameter [mm]: 12
- Mounting Type: Rubber-Metal Mount
- Control / Trailing Arm Type: Triangular Control Arm (CV)
- Required quantity: 2
- Length [mm]: 54
- for OE number: 357407182
- Diameter [mm]: 33
- Outer Length [mm]: 29
- Inner length [mm]: 54
- Item number: RH14-0000
- Manufacturer: REINHOCH
- EAN number: 5901655157574
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left
- paired article number: 19691
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Required quantity: 1
- Item number: 19690
- Manufacturer: MAPCO
- EAN number: 4043605021229
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right
- paired article number: 19690
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Required quantity: 1
- Item number: 19691
- Manufacturer: MAPCO
- EAN number: 4043605021243
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower Front Axle, both sides
- Production Number: 4210110
- Item number: 4210110
- Manufacturer: KRAFT
- EAN number: 5901159078757
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Item number: 1140101670
- Manufacturer: JP GROUP
- EAN number: 5710412560515
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Item number: 1140101680
- Manufacturer: JP GROUP
- EAN number: 5710412560522
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Suspension material: Sheet Steel
- Vehicle Identification Number (VIN) from: 31-N-250-990
- Cone Size [mm]: 16,5
- Fitting Position: Front Axle Left
- Cone Pitch: 1 / 10
- Item number: SKCA-0050228
- Manufacturer: STARK
- EAN number: 4059191054060
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front axle both sides, Lower
- Weight [kg]: 3,042
- Item number: SKCA-0050326
- Manufacturer: STARK
- EAN number: 4059191072859
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- paired article number: 19691 / 7
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Item number: 19690/7
- Manufacturer: MAPCO
- EAN number: 4043605559685
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Vehicle Identification Number (VIN) to: 31-N-250-989
- Supplementary Info: Original VAICO Quality
- Fitting Position: Lower, Front Axle
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 37,5
- Packaging height [cm]: 6
- Packaging Depth [cm]: 42
- Item number: V10-7070
- Manufacturer: VAICO
- EAN number: 4046001186851
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Required quantity: 2
- Item number: 19690/1
- Manufacturer: MAPCO
- EAN number: 4043605021236
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Front Axle Right
- Item number: 1140101600
- Manufacturer: JP GROUP
- EAN number: 5710412141417
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Supplementary Article / Supplementary Info: with rubber-metal mounts
- Control / Trailing Arm Design: Triangular Control Arm
- Surface: Cathodic Painting, Black-painted
- Item number: 103 471
- Manufacturer: TOPRAN
- EAN number: 4078240000018
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 3,042
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Item number: 09529
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816095293
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle Left, outer, Lower
- Vehicle Identification Number (VIN) to: 31-N-250-989
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 19
- Length [mm]: 391
- paired article number: 210580
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,76
- as standard
- Item number: 210579
- Manufacturer: A.B.S.
- EAN number: 8717109315554
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Vehicle Identification Number (VIN) from: 31-N-250-990
- Cone Size [mm]: 16
- Fitting Position: Right, Lower Front Axle
- Length [mm]: 450
- Height [mm]: 120
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,295
- Width [mm]: 380
- Item number: SKCA-0050280
- Manufacturer: STARK
- EAN number: 4059191073672
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5