Polo 6n1 1.4 Suspension arm (55 hp Petrol AEX)
-
- Fitting Position: Front Axle, Left, outer, Lower
- Rim Size [inch]: 13
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 14,6
- Fitting Position: Front Axle Left
- Cone Pitch: 1 / 10
- Thread Size: M10x1
- Supplementary Article / Supplementary Info Info 2: with ball joints
- Weight [kg]: 2,50
- Item number: 273C0698
- Manufacturer: RIDEX
- EAN number: 4059191693351
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: outer, Front axle both sides
- Supplementary Article / Supplementary Info Info 2: without ball joint, with rubber mount
- Required quantity: 2
- Item number: 273C0430
- Manufacturer: RIDEX
- EAN number: 4059191331345
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Rim Size [inch]: 13
- Fitting Position: Left
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 14,7
- Fitting Position: Front Axle Left, Lower
- Length [mm]: 354
- Cone Pitch: 1 / 10
- Supplementary Article / Supplementary Info Info 2: with nut
- Item number: 273C0123
- Manufacturer: RIDEX
- EAN number: 4059191332465
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front axle both sides, Lower
- Length [mm]: 300, 285
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Required quantity: 2,0
- Item number: 273C0658
- Manufacturer: RIDEX
- EAN number: 4059191691968
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 14,5
- Fitting Position: Front Axle Right
- Length [mm]: 354
- Cone Pitch: 1 / 10
- Supplementary Article / Supplementary Info Info 2: with nut
- Item number: 273C0427
- Manufacturer: RIDEX
- EAN number: 4059191266623
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Vehicle Identification Number (VIN): 6H-W-055365
- Control / Trailing Arm Type: Control Arm
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Front Axle Right, Lower
- Cone Pitch: 1 / 10
- Thread Size: M10x1,25
- Supplementary Article / Supplementary Info Info 2: with bearing(s), with ball joint
- Item number: 273C0711
- Manufacturer: RIDEX
- EAN number: 4059191696864
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Supplementary Article / Supplementary Info Info 2: with ball joint, with lock screw set
- Quantity Unit: Set
- Fitting Position: Front Axle Left, Front Axle Right
- Control / Trailing Arm Type: Control Arm
- Required quantity: 1
- Item number: 2905L0023
- Our price: 68,36 €
- Manufacturer: RIDEX
- EAN number: 4064138127196
- Condition: New
- Supplementary Article / Supplementary Info Info 2: with ball joint, with lock screw set
- Quantity Unit: Set
- Fitting Position: Lower, Front Axle, Front Axle Right, Front Axle Left
- Control / Trailing Arm Type: Control Arm
- Required quantity: 1
- Net weight [kg]: 4,89
- Gross Weight [kg]: 5,07
- Item number: 2905L0082
- Our price: 81,46 €
- Manufacturer: RIDEX
- EAN number: 4066423067798
- Condition: New
- Fitting Position: Front, Front Axle
- Inner Diameter [mm]: 12
- Mounting Type: Rubber-Metal Mount
- Control / Trailing Arm Type: Triangular Control Arm (CV)
- Required quantity: 2
- Length [mm]: 54
- Construction Year from: 10 / 1995
- for OE number: 357407182
- Diameter [mm]: 33
- Outer Length [mm]: 29
- Inner length [mm]: 54
- Item number: RH14-0000
- Manufacturer: REINHOCH
- EAN number: 5901655157574
- Condition: New
-
- Fitting Position: Front Axle, Left, outer, Lower
- Rim Size [inch]: 13
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 14,6
- Fitting Position: Front Axle Left
- Cone Pitch: 1 / 10
- Thread Size: M10x1
- Supplementary Article / Supplementary Info Info 2: with ball joints
- Weight [kg]: 2,50
- Item number: SKCA-0050696
- Manufacturer: STARK
- EAN number: 4059191419272
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Rim Size [inch]: 13, 15
- Item number: 1140101970
- Manufacturer: JP GROUP
- EAN number: 5710412560539
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: outer, Front axle both sides
- Supplementary Article / Supplementary Info Info 2: without ball joint, with rubber mount
- Required quantity: 2
- Item number: SKCA-0050428
- Manufacturer: STARK
- EAN number: 4059191078257
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Left
- Rim Size [inch]: 14
- for OE number: 6N0407151B
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Lower, Front Axle
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Weight [kg]: 1,98
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 33
- Packaging height [cm]: 4
- Packaging Depth [cm]: 37
- Item number: V10-7072
- Manufacturer: VAICO
- EAN number: 4046001186875
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Rim Size [inch]: 13.0, 15.0
- Fitting Position: Front Axle Right
- Engine Code: AEX
- Control / Trailing Arm Type: Control Arm
- Item number: 110049110
- Manufacturer: AUTOMEGA
- EAN number: 2232388396900
- Condition: New
-
- Fitting Position: Front Axle Left, Lower
- Rim Size [inch]: 13
- Control / Trailing Arm Type: Control Arm
- paired article number: VO-WP-0235P
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Bag
- Packaging length [cm]: 39
- Packaging width [cm]: 33
- Packaging height [cm]: 7,5
- Item number: VO-WP-0236P
- Manufacturer: MOOG
- EAN number: 4044197266357
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Front Axle Left, Front Axle Right, outer, Lower
- paired article number: 210704
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Weight [kg]: 1,932
- as standard
- Item number: 210704
- Manufacturer: A.B.S.
- EAN number: 8717109534047
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
-
- Rim Size [inch]: 13
- Fitting Position: Left
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 14,7
- Fitting Position: Front Axle Left, Lower
- Length [mm]: 354
- Cone Pitch: 1 / 10
- Supplementary Article / Supplementary Info Info 2: with nut
- Item number: SKCA-0050120
- Manufacturer: STARK
- EAN number: 4059191286386
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front axle both sides, Lower
- Length [mm]: 300, 285
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Required quantity: 2,0
- Item number: SKCA-0050656
- Manufacturer: STARK
- EAN number: 4059191412532
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle Left, outer, Lower
- Rim Size [inch]: 13.0
- Rim Size [inch]: 13
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 14,6
- Length [mm]: 343
- paired article number: 210498
- Thread Size: M10X1,00 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 2,708
- as standard
- Item number: 210497
- Manufacturer: A.B.S.
- EAN number: 8717109314731
- Condition: New
Important: Observe Fitting Instructions
-
- Fitting Position: Front Axle Right, outer, Lower
- Rim Size [inch]: 13.0
- Rim Size [inch]: 13
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 14,6
- Length [mm]: 343
- paired article number: 210497
- Thread Size: M10X1,00 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 2,701
- as standard
- Item number: 210498
- Manufacturer: A.B.S.
- EAN number: 8717109314748
- Condition: New
Important: Observe Fitting Instructions
- 1
- 2
- 3
- 4
- 5