VW Polo 9A4 1.6 Suspension arm (101 hp Petrol CFZA)
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Lower, Front Axle
- Engine Code: BAH
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 2,55
- Inner Diameter [mm]: 12,3
- Alternatively
- Packaging Depth [cm]: 37,7
- Item number: 273C0700
- Manufacturer: RIDEX
- EAN number: 4059191694112
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 14,8
- Fitting Position: Front Axle Right, Lower
- External Thread 2 [mm]: M12x1,5
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,18
- Item number: 273C0032
- Manufacturer: RIDEX
- EAN number: 4059191205400
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 14,8
- Fitting Position: Left, Lower, Front Axle
- Packing Type: Bag
- Item number: 273C0026
- Manufacturer: RIDEX
- EAN number: 4059191205073
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 14,8
- Fitting Position: Front Axle Right, Lower
- Length [mm]: 364
- Cone Pitch: 1 / 5
- Thread Size: M12X1,5 RHT
- Item number: 273C1061
- Manufacturer: RIDEX
- EAN number: 4059191641260
- Condition: New
-
- Construction Year to: 07 / 2006
- Fitting Position: outer
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 14,8
- Fitting Position: Left, Front Axle
- Length [mm]: 360
- Cone Pitch: 1 / 5
- Thread Size: M12X1,5 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,100
- Item number: 273C1062
- Manufacturer: RIDEX
- EAN number: 4059191641284
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Vehicle Identification Number (VIN) from: 6L-8-173 860
- Cone Size [mm]: 15
- Fitting Position: Front Axle, Left, Lower
- Length [mm]: 362,1
- Thread Size: M12x1.5
- Item number: 273C1025
- Manufacturer: RIDEX
- EAN number: 4059191602384
- Condition: New
price incl. 19% VAT
excl. delivery costs


- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Lower, Front Axle
- Engine Code: BAH
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 2,55, 2,49
- Inner Diameter [mm]: 12,3
- Alternatively
- Packaging Depth [cm]: 37,7
- Item number: GCB730199
- Manufacturer: goCORE
- EAN number: 4067448640379
- Condition: New


- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 14,8
- Fitting Position: Front Axle Right, Lower
- Length [mm]: 364
- Cone Pitch: 1 / 5
- Thread Size: M12X1,5 RHT
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Item number: GCB730342
- Manufacturer: goCORE
- EAN number: 4067448691012
- Condition: New


-
- Construction Year to: 07 / 2006
- Fitting Position: outer
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 14,8
- Fitting Position: Left, Front Axle
- Length [mm]: 360
- Cone Pitch: 1 / 5
- Thread Size: M12X1,5 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,100
- Item number: GCB730343
- Manufacturer: goCORE
- EAN number: 4067448691029
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Lower, Front Axle
- Engine Code: BAH
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 2,55
- Inner Diameter [mm]: 12,3
- Alternatively
- Packaging Depth [cm]: 37,7
- Item number: SKCA-0050698
- Manufacturer: STARK
- EAN number: 4059191420971
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Construction Year to: 04 / 2012
- Fitting Position: Front axle both sides
- Length [mm]: 380
- Height [mm]: 60
- Thread Size: bez sworznia
- Width [mm]: 350
- Item number: RH04-0051
- Manufacturer: REINHOCH
- EAN number: 5901655171549
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Lower, Front Axle
- TecDoc Engine Number: BAH
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 35
- Packaging height [cm]: 6,5
- Packaging Depth [cm]: 37,7
- Item number: V10-7235
- Manufacturer: VAICO
- EAN number: 4046001320552
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower
- Length [mm]: 302
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 2,83
- Inner Diameter 2 [mm]: 12,2
- Item number: SKCA-0051044
- Manufacturer: STARK
- EAN number: 4059191603374
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle, outer, Lower, Right, both sides
- Length [mm]: 380
- Height [mm]: 60
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Width [mm]: 350
- Item number: TC1428
- Manufacturer: DELPHI
- EAN number: 5012759351406
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Front Axle Right, Lower, outer
- Item number: JTC940
- Manufacturer: TRW
- EAN number: 3322937336654
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Item number: M-S0919
- Manufacturer: MERTZ
- EAN number: 5902701031923
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Weight [kg]: 2,55
- Observe service information
- TecDoc Engine Number: BAH
- Item number: 27530
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816275305
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Weight [kg]: 2,55
- TecDoc Engine Number: BAH
- Item number: 30 92 7530
- Manufacturer: SWAG
- EAN number: 4044688569394
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- TecDoc Engine Number: BAH
- Vehicle Identification Number (VIN) to: 9N-9Y035 000, 9N-9B031 000, 9N-9U022 150
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle Right, Front Axle Left, Lower
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Required quantity: 2
- replacement in pairs recommended
- Item number: 116 050 0028
- Manufacturer: MEYLE
- EAN number: 4040074334294
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower Front Axle
- paired article number: 400
- for OE number: 6Q0407151L
- Item number: DSS1239
- Manufacturer: DAYCO
- EAN number: 8021787433418
- Condition: New
- 1
- 2
- 3
- 4
- 5