333ÌåÓýÖ±²¥Ãâ·ÑÔÚÏ߯½Ì¨

  • SHOP
  • CLUB
0
My Garage
Add vehicle
0
items #99-2400
0,00 €
Your basket is empty

VW Caddy Alltrack Kombi 1.6 SRE Beam axle (110 hp Petrol CWVA)

1 items
ROOKS OK-02.0462 Mounting Kit, axle beam
Article number: OK-02.0462
Submit a review
  • Fitting Position: Rear Axle
  • Mounting / Removal: for removal
  • Supplementary Info: RENAULT LAGUNA II
  • Item number: OK-02.0462
  • Our price: 68,08 €
  • Manufacturer: ROOKS
  • EAN number: OK-02.0462
  • Condition: New
Details
Сurrently out of stock
68,08 €

price incl. 19% VAT

excl. delivery costs

Add to wish list
VW CADDY ALLTRACK Variant (SAB) 1.6 SRE Bestsellers
  • Diameter [mm]: 272
  • Brake Disc Type: solid
  • Supplementary Info: Original VAICO Quality
  • Brake Disc Thickness [mm]: 9,7
  • Fitting Position: Rear Axle
  • Height [mm]: 48,2
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 8
  • Brake Disc Hub Height [mm]: 38,2
  • Packaging width [cm]: 28
  • Packaging height [cm]: 10
  • Packaging Depth [cm]: 28
  • Drilled: no
  • Item number: V10-40086
  • Manufacturer: VAICO
  • EAN number: 4046001550584
  • Condition: New
Show OEM numbers of the product
Additional information

In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.

installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.

measurement, including photos.

For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.

If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Details
In stock
25,93 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
    • for PR number: 1ZA
    • Fitting Position: Front Axle
  • Diameter [mm]: 312,0
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 25,0
  • Height [mm]: 49,9
  • Surface: Coated
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 22,0
  • Inner Diameter [mm]: 146,0
  • Machining: High-carbon
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0115 / 1001
  • Bore Diameter [mm]: 15,3
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 24.0125-0158.1
  • Manufacturer: ATE
  • EAN number: 4006633209489
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-57%
compared to RRP 156,13 €

67,07 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
    • Fitting Position: Front Axle
    • for PR number: 1ZE
  • Diameter [mm]: 288
  • Brake Disc Type: internally vented
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 50
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 22
  • Tightening Torque [Nm]: 120
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 09.9145.14
  • Manufacturer: BREMBO
  • EAN number: 8020584013922
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-23%
compared to RRP 70,16 €

53,95 €
Price per item

price incl. 19% VAT

free delivery

Add to comparison list

Here you can add a product to compare

Add to wish list
    • Fitting Position: Front Axle
    • for PR number: 1ZE
  • Diameter [mm]: 288
  • Brake Disc Type: internally vented, slotted
  • Product line: MAX LINE
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 50
  • Surface: Coated
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 22
  • Tightening Torque [Nm]: 120
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 09.9145.75
  • Manufacturer: BREMBO
  • EAN number: 8020584015162
  • Condition: New
Show OEM numbers of the product
Additional information

For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.

Details
In stock
-73%
compared to RRP 208,02 €

55,48 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
    • Fitting Position: Front Axle
    • for PR number: 1ZA
  • Diameter [mm]: 312
  • Brake Disc Type: internally vented
  • Product line: COATED DISC LINE
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 50
  • Surface: Coated
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 22
  • Tightening Torque [Nm]: 120
  • Machining: High-carbon
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 09.9772.11
  • Manufacturer: BREMBO
  • EAN number: 8020584018286
  • Condition: New
Show OEM numbers of the product
Details
In stock
-70%
compared to RRP 164,18 €

48,31 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
  • Diameter [mm]: 288
  • Brake Disc Type: internally vented
  • for PR number: 1ZE
  • Brake Disc Thickness [mm]: 25
  • Fitting Position: Front Axle
  • Surface: Coated
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Thickness [mm]: 49,7
  • Minimum thickness [mm]: 22
  • Weight [kg]: 7,56
  • Number of mounting bores: 1
  • Observe service information
  • Drilled: no
  • Item number: 22902
  • Manufacturer: FEBI BILSTEIN
  • EAN number: 4027816229025
  • Condition: New
Show OEM numbers of the product
Additional information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Details
In stock
-65%
compared to RRP 103,00 €

35,09 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
    • Fitting Position: Front Axle
    • for PR number: 1ZA
  • Diameter [mm]: 312
  • Brake Disc Type: internally vented, slotted
  • Product line: MAX LINE
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 50
  • Surface: Coated
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 22
  • Tightening Torque [Nm]: 120
  • Machining: High-carbon
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 09.9772.75
  • Manufacturer: BREMBO
  • EAN number: 8020584029725
  • Condition: New
Show OEM numbers of the product
Additional information

For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.

Details
Free delivery on this item
In stock
-68%
compared to RRP 219,71 €

69,96 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
    • Fitting Position: Front Axle
    • for PR number: 1ZE
  • Diameter [mm]: 288
  • Brake Disc Type: internally vented
  • Product line: COATED DISC LINE
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 50
  • Surface: Coated
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 22
  • Tightening Torque [Nm]: 120
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 09.9145.11
  • Manufacturer: BREMBO
  • EAN number: 8020584024287
  • Condition: New
Show OEM numbers of the product
Details
In stock
-69%
compared to RRP 134,53 €

40,50 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
  • Diameter [mm]: 272
  • Brake Disc Type: solid
  • Product line: PREMIER
  • Brake Disc Thickness [mm]: 10
  • Fitting Position: Rear Axle
  • Height [mm]: 48
  • Surface: Oiled
  • Centering Diameter [mm]: 65
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 9
  • Weight [kg]: 6,2
  • Tightening Torque [Nm]: 120
  • Test Mark: R90 homologated
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Packing Type: Box
  • Packaging length [cm]: 27,5
  • Packaging width [cm]: 27,5
  • Packaging height [cm]: 10,5
  • Drilled: no
  • Item number: DDF1895
  • Manufacturer: FERODO
  • EAN number: 4044197541324
  • Condition: New
Show OEM numbers of the product
Details
In stock
-66%
compared to RRP 75,31 €

25,43 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
DELPHI BG3953 Brake disc Front Axle, 312x25mm, 5, Vented
Article number: BG3953
Submit a review
    • Fitting Position: Front Axle
    • for PR number: 1ZA
  • Diameter [mm]: 312
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,9
  • Surface: Oiled
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 22
  • Test Mark: E1 90R-02C0277 / 1198
  • Drilled: no
  • Item number: BG3953
  • Manufacturer: DELPHI
  • EAN number: 5012759360545
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
128,92 €

price incl. 19% VAT

free delivery

Add to comparison list

Here you can add a product to compare

Add to wish list
  • Diameter [mm]: 272
  • Brake Disc Type: solid
  • Brake Disc Thickness [mm]: 10
  • Fitting Position: Rear Axle
  • Height [mm]: 48,3
  • Surface: Oiled
  • Centering Diameter [mm]: 65
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 8
  • fulfils ECE norm: ECE-R90
  • Bore Diameter up to [mm]: 15,3
  • Drilled: no
  • Item number: 0 986 479 677
  • Manufacturer: BOSCH
  • EAN number: 4047024749801
  • Condition: New
Show OEM numbers of the product
Details
In stock
-64%
compared to RRP 79,85 €

27,96 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
    • for PR number: 1ZE
    • Fitting Position: Front Axle
  • Diameter [mm]: 288
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 25,0
  • Height [mm]: 49,9
  • Surface: Coated
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 22,0
  • Inner Diameter [mm]: 144,0
  • Machining: High-carbon
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0115 / 0010
  • Bore Diameter [mm]: 15,3
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 24.0125-0145.1
  • Manufacturer: ATE
  • EAN number: 4006633113472
  • Condition: New
Show OEM numbers of the product
Details
In stock
-57%
compared to RRP 126,62 €

53,31 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
    • Fitting Position: Front Axle
    • for PR number: 1ZE
  • Diameter [mm]: 288
  • Brake Disc Type: Vented
  • Product line: PREMIER
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 50
  • Surface: Oiled
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Weight [kg]: 15,35
  • Tightening Torque [Nm]: 120
  • Test Mark: R90 homologated
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Packing Type: Box
  • Packaging length [cm]: 28,5
  • Packaging width [cm]: 28,5
  • Packaging height [cm]: 10
  • Drilled: no
  • Item number: DDF1218
  • Manufacturer: FERODO
  • EAN number: 4044197247547
  • Condition: New
Show OEM numbers of the product
Details
In stock
-60%
compared to RRP 90,08 €

35,89 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
    • Fitting Position: Front Axle
    • for PR number: 1ZA
  • Diameter [mm]: 312
  • Brake Disc Type: Vented
  • Product line: PREMIER
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 50
  • Surface: Oiled
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 23
  • Weight [kg]: 8,94
  • Tightening Torque [Nm]: 120
  • Test Mark: R90 homologated
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Packing Type: Box
  • Packaging length [cm]: 31,3
  • Packaging width [cm]: 31,3
  • Packaging height [cm]: 10,4
  • Drilled: no
  • Item number: DDF1305
  • Manufacturer: FERODO
  • EAN number: 4044197335183
  • Condition: New
Show OEM numbers of the product
Details
In stock
-65%
compared to RRP 109,93 €

37,94 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
    • Fitting Position: Front Axle
    • for PR number: 1ZA
  • Diameter [mm]: 312
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,9
  • Surface: Painted
  • Centering Diameter [mm]: 65
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Thread Size: 15,4
  • Colour: black
  • Test Mark: E190R-02 C0176 / 0613
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: DF4464S
  • Manufacturer: TRW
  • EAN number: 3322937685219
  • Condition: New
Show OEM numbers of the product
Details
In stock
-64%
compared to RRP 155,76 €

55,88 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
  • Diameter [mm]: 272,0
  • Brake Disc Type: solid
  • Brake Disc Thickness [mm]: 9,7
  • Fitting Position: Rear Axle
  • Height [mm]: 48,2
  • Surface: Coated
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 8,0
  • Inner Diameter [mm]: 149,0
  • MAPP code available
  • Test Mark: E1 90R-02C0165 / 0523
  • Bore Diameter [mm]: 15,3
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 24.0110-0356.1
  • Manufacturer: ATE
  • EAN number: 4006633344531
  • Condition: New
Show OEM numbers of the product
Details
In stock
-56%
compared to RRP 105,43 €

45,46 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
  • Diameter [mm]: 272
  • Brake Disc Type: solid
  • Brake Disc Thickness [mm]: 10
  • Fitting Position: Rear Axle
  • Height [mm]: 48
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 8
  • Tightening Torque [Nm]: 120
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 08.B413.10
  • Manufacturer: BREMBO
  • EAN number: 8020584030417
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
60,74 €
Price per item

price incl. 19% VAT

free delivery

Add to comparison list

Here you can add a product to compare

Add to wish list
NK 314788 Brake disc Front Axle, 288x25mm, 5, Vented
Article number: 314788
Submit a review
    • Fitting Position: Front Axle
    • for PR number: 1ZE
  • Diameter [mm]: 288
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 50
  • Surface: Coated
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Minimum thickness [mm]: 22
  • Net weight [kg]: 7,82
  • Drilled: no
  • Item number: 314788
  • Manufacturer: NK
  • EAN number: 5703858739874
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock (Item(s) left: 2)
150,50 €
Price per item

price incl. 19% VAT

free delivery

Add to comparison list

Here you can add a product to compare

Add to wish list
  • Diameter [mm]: 272
  • Brake Disc Type: solid
  • Brake Disc Thickness [mm]: 10
  • Fitting Position: Rear Axle
  • Surface: Coated
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Thickness [mm]: 48
  • Minimum thickness [mm]: 8
  • Weight [kg]: 4,11
  • Number of mounting bores: 1
  • for OE number: 5Q0 615 601 D
  • Observe service information
  • Drilled: no
  • Item number: 36128
  • Manufacturer: FEBI BILSTEIN
  • EAN number: 4027816361282
  • Condition: New
Show OEM numbers of the product
Additional information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Details
In stock
-71%
compared to RRP 92,50 €

26,32 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
333ÌåÓýÖ±²¥Ãâ·ÑÔÚÏ߯½Ì¨ the best offers on