Vehicle identification number: 8252456
Hyundai Accent LC 1.6 Switch, clutch control (105 hp Petrol G4ED)
- Diameter [mm]: 11 x 17, 15 x 17, 16.5 x 17, 17 x 17, 19 x 17, 20 x 17, 20.5 x 17, 25 x 17
- Quantity Unit: Set
- Packaging: Plastic Cassette
- Item number: WT-2097
- Our price: 24,35 €
- Manufacturer: Weber Tools
- EAN number: 8719558502387
- Condition: New
- Number of Parts [parts]: 1
- Suitable for vehicle type: PC (passenger car)
- Net Weight [g]: 200
- Total Length [mm]: 115
- Outer Diameter 2 [mm]: 15
- Drive [mm]: 13
- Diameter [mm]: 26,5
- Item number: KL-0500-15
- Our price: 34,11 €
- Manufacturer: GEDORE
- EAN number: 4046459094623
- Condition: New
- Left- / right-hand drive vehicles: for right-hand drive vehicles
- Voltage [V]: 12
- Thread Size: M 10x1,25
- Operating Mode: Mechanical, Manual (foot operated)
- Vehicle Equipment: for vehicles without cruise control
- adjustable: adjustable
- Number of pins: 2
- Number of connectors: 2
- Housing Colour: black
- Connector Shape: angular
- Weight [kg]: 0,04004
- Product line: EXPERT KITS +
- Packaging width [cm]: 4
- Packaging height [cm]: 6,7
- Packaging Depth [cm]: 6,8
- Item number: V38-73-0002
- Our price: 11,29 €
- Manufacturer: VEMO
- EAN number: 4046001381379
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Number of pins: 2
- Housing Colour: white
- Operating Mode: Mechanical
- Item number: 24546
- Our price: 27,68 €
- Manufacturer: FAE
- EAN number: 22100562987484298748
- Condition: New
- Supplementary Info: Q+, original equipment manufacturer quality
- Item number: V52-73-0024
- Our price: 13,23 €
- Manufacturer: VEMO
- EAN number: 4046001662171
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 241
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 19
- Fitting Position: Front Axle
- Height [mm]: 52
- Surface: Oiled
- Centering Diameter [mm]: 63,2
- Number of Holes: 4
- Minimum thickness [mm]: 17
- Test Mark: E1 90R-02C0957 / 2559
- Drilled: no
- Item number: BG3749
- Manufacturer: DELPHI
- EAN number: 5012759280461
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 257
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Front Axle
- Height [mm]: 45
- Centering Diameter [mm]: 69
- Number of Holes: 4
- Bolt Hole Circle 脴 [mm]: 114
- Minimum thickness [mm]: 20
- Drilled: no
- Item number: BDC3773
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593294943
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 09 / 2005
- Fitting Position: Front Axle
- Diameter [mm]: 241
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 19,0
- Height [mm]: 52,1
- Surface: Coated
- Centering Diameter [mm]: 62,2
- Number of Holes: 4
- Bolt Hole Circle 脴 [mm]: 100,0
- Minimum thickness [mm]: 17,0
- Inner Diameter [mm]: 126,0
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0106
- Bore Diameter [mm]: 12,5
- Drilled: no
- Item number: 24.0119-0114.1
- Manufacturer: ATE
- EAN number: 4006633229623
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 241
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 19
- Fitting Position: Front Axle
- Height [mm]: 52
- Surface: Oiled
- Centering Diameter [mm]: 63,2
- Number of Holes: 4
- Bolt Hole Circle 脴 [mm]: 100
- Minimum thickness [mm]: 17
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,5
- Drilled: no
- Item number: 0 986 479 377
- Manufacturer: BOSCH
- EAN number: 4047024293281
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Fitting Position: Front Axle
- Height 1 [mm]: 49,5
- Height 2 [mm]: 49,5
- Width 2 [mm]: 127,5
- Width 1 [mm]: 127,5
- Thickness 1 [mm]: 15
- Thickness 2 [mm]: 15
- Item number: J3600515
- Our price: 19,32 €
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416056216
- Condition: New
quantity 1:聽2 quantity 2:聽2
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 241
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 19
- Fitting Position: Front Axle
- Height [mm]: 52
- Centering Diameter [mm]: 62
- Number of Holes: 4
- Minimum thickness [mm]: 17
- Tightening Torque [Nm]: 100
- Machining: High-carbon
- Drilled: no
- Item number: 09.9537.20
- Manufacturer: BREMBO
- EAN number: 8020584953723
- Condition: New
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Fitting Position: Front Axle
- Length [mm]: 127,5
- Width [mm]: 49
- Thickness 1 [mm]: 14,5
- Test Mark: ECE R90 Approved
- Weight [kg]: 1,25
- Observe service information
- Item number: 16683
- Our price: 17,14 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816166832
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Diameter [mm]: 241
- Brake Disc Type: Vented
- Product line: PREMIER
- Brake Disc Thickness [mm]: 19
- Fitting Position: Front Axle
- Height [mm]: 52,4
- Surface: Oiled
- Centering Diameter [mm]: 62,4
- Number of Holes: 4
- Bolt Hole Circle 脴 [mm]: 100
- Minimum thickness [mm]: 17
- Weight [kg]: 9,45
- Tightening Torque [Nm]: 100
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Packing Type: Box
- Packaging length [cm]: 24
- Packaging width [cm]: 24
- Packaging height [cm]: 8,9
- Drilled: no
- Item number: DDF1632
- Manufacturer: FERODO
- EAN number: 4044197460076
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 09 / 2005
- Fitting Position: Front Axle
- Diameter [mm]: 241
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 19
- Height [mm]: 52
- Centering Diameter [mm]: 63,2
- Number of Holes: 4
- Minimum thickness [mm]: 17
- Drilled: no
- Item number: H2002V
- Manufacturer: LPR
- EAN number: 8032532022085
- Condition: New
price incl. 19% VAT
-
- Construction Year to: 09 / 2005
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: Akebono
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 49,0
- Width [mm]: 127,5
- Test Mark: E9 90R-01247 / 1438
- MAPP code available
- Item number: 13.0460-5872.2
- Our price: 27,56 €
- Manufacturer: ATE
- EAN number: 4006633218788
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 16
- Fitting Position: Front Axle
- Material: Low-Metallic
- Height [mm]: 49
- Width [mm]: 127,5
- WVA Number: 21012
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with mounting manual
- Manufacturer Restriction: AKEBONO System
- Article number of recommended accessories: 1987474326
- Observe technical data
- Item number: 0 986 461 127
- Our price: 22,79 €
- Manufacturer: BOSCH
- EAN number: 3165143236987
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: Akebono
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 14,8
- Fitting Position: Front Axle
- Height [mm]: 49
- Width [mm]: 127,4
- WVA Number: 21012
- Weight [kg]: 1
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Item number: 2101202
- Our price: 24,27 €
- Manufacturer: TEXTAR
- EAN number: 4019722183065
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: Mando
- Wear Warning Contact: with acoustic wear warning
- Product line: PREMIER ECO FRICTION
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: with accessories
- Number of wear indicators [per axle]: 2
- Height [mm]: 49
- Width [mm]: 127,5
- Thickness 1 [mm]: 15,5
- WVA Number: 21012, 21773, 21774
- Test Mark: R90 Homologated
- Weight [kg]: 1,338
- Quantity per axle: 1, 4
- Packing Type: Box
- Number of clips: 4
- Packaging length [cm]: 17
- Packaging width [cm]: 13
- Packaging height [cm]: 5
- Item number: FDB4076
- Our price: 25,52 €
- Manufacturer: FERODO
- EAN number: 4044197413225
- Condition: New
- Quantity Unit: Axle Set
- Brake System: Akebono
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: without accessories
- Number of wear indicators [per axle]: 2
- Height [mm]: 49
- Width [mm]: 127
- WVA Number: 21012, 21773, 21774
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Item number: P 30 024
- Our price: 18,41 €
- Manufacturer: BREMBO
- EAN number: 8020584060629
- Condition: New
- Diameter [mm]: 241
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 19
- Fitting Position: Front Axle
- Surface: Coated
- Centering Diameter [mm]: 63
- Rim Hole Number: 4
- Bolt Hole Circle 脴 [mm]: 100
- Thickness [mm]: 53
- Minimum thickness [mm]: 17
- Weight [kg]: 4,5
- Observe service information
- Drilled: no
- Item number: 31767
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816317678
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs