Vehicle identification number: 1590AGK
Range Rover Evoque L538 2.0 D 4x4 Radiator fan switch (241 hp Diesel 204DTA(AJ20D4))
-
- Relay function: Engine control unit
- Corresponds to the original part in colour: black / white
- Voltage [V]: 12
- Relay function: Terminal 30, Clamp 87
- Rated current [A]: 40
- Product line: Original Quality
- Fitting Position: Engine Compartment
- Packaging height [cm]: 4,2
- Packaging Depth [cm]: 2,8
- Item number: V15-71-0007
- Our price: 9,55 €
- Manufacturer: VEMO
- EAN number: 4046001270352
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Width [mm]: 76,2
- Length [mm]: 133,35
- Height [mm]: 3,3
- Item number: V25-79-0012
- Our price: 376,67 €
- Manufacturer: VEMO
- EAN number: 4046001855764
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 300,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28,0
- Height [mm]: 52
- Surface: Coated
- Centering Diameter [mm]: 63,5
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 108,0
- Minimum thickness [mm]: 26,0
- Inner Diameter [mm]: 140,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0038
- Bore Diameter [mm]: 15,8
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0128-0154.1
- Manufacturer: ATE
- EAN number: 4006633309851
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Vehicle Identification Number (VIN) to: FH999999
- Brake System: TRW
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 16,9
- Quantity Unit: Axle Set
- Height [mm]: 48,8
- Width [mm]: 106,7
- WVA Number: 24496
- Weight [kg]: 1
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Article number of recommended accessories: 82054900
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Item number: 2449601
- Our price: 38,86 €
- Manufacturer: TEXTAR
- EAN number: 4019722287930
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Brake System: Ate
- Thickness [mm]: 20
- Quantity Unit: Axle Set
- Height [mm]: 71,9
- Height 2 [mm]: 66,6
- Width [mm]: 156,3
- Width 2 [mm]: 155
- Thickness 2 [mm]: 19
- Item number: BP1558
- Our price: 83,83 €
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438157826
- Condition: New
-
- Fitting Position: Front Axle
- Rim Size [inch]: 16
- Brake Size: 16"
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 28
- Height [mm]: 52
- Centering Diameter [mm]: 64
- Number of Holes: 5
- Minimum thickness [mm]: 26
- Tightening Torque [Nm]: 170
- Drilled: no
- Item number: 09.A427.10
- Manufacturer: BREMBO
- EAN number: 8020584019351
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Front Axle
- Brake Size: 16"
- Diameter [mm]: 300
- Brake Disc Type: internally vented, Perforated
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 28
- Height [mm]: 52
- Surface: Coated
- Centering Diameter [mm]: 64
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle 脴 [mm]: 108
- Minimum thickness [mm]: 26
- Weight [kg]: 8,70
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Item number: 250.1360.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238752592
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Length [mm]: 155, 156,4
- Width [mm]: 66,6, 72,1
- Thickness 1 [mm]: 19,5, 18,5
- Test Mark: ECE R90 Approved
- Weight [kg]: 2,32
- Supplementary Article / Supplementary Info Info 2: with piston clip
- for brake disc diameter [mm]: 300
- Observe service information
- Item number: 16613
- Our price: 30,39 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816166139
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Product line: PREMIER
- Brake Disc Thickness [mm]: 28
- Height [mm]: 52
- Surface: Oiled
- Centering Diameter [mm]: 63,6
- Number of Holes: 5
- Bore Diameter 2 [mm]: 15,8
- Bolt Hole Circle 脴 [mm]: 108
- Minimum thickness [mm]: 26
- Weight [kg]: 17,95
- Tightening Torque [Nm]: 170
- Test Mark: R90 homologated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Packing Type: Box
- Packaging length [cm]: 30
- Packaging width [cm]: 30
- Packaging height [cm]: 11
- Drilled: no
- Item number: DDF1567
- Manufacturer: FERODO
- EAN number: 4044197449675
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28,0
- Height [mm]: 52
- Surface: Coated
- Centering Diameter [mm]: 63,5
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 108
- Minimum thickness [mm]: 26
- Inner Diameter [mm]: 140
- Machining: High-carbon
- Rim Size [inch]: 16
- Bore Diameter [mm]: 15,8
- Drilled: no
- Item number: C3G039ABE
- Manufacturer: ABE
- EAN number: 5900427199941
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- for brake disc diameter [mm]: 302
- Brake System: Lucas / TRW
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 17,3
- Quantity Unit: Axle Set
- Height [mm]: 48,7
- Width [mm]: 106,0
- Test Mark: E1 90R-02A0498 / 0383
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 24.8190-0816.2
- Number of bolts / screws: 4
- Item number: 13.0460-2722.2
- Our price: 44,41 €
- Manufacturer: ATE
- EAN number: 4006633305426
- Condition: New
-
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 300
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Quantity Unit: Axle Set
- Height 1 [mm]: 72,0
- Height 2 [mm]: 66,6
- Width 2 [mm]: 155,1
- Width 1 [mm]: 156,3
- Thickness 1 [mm]: 19,3
- Thickness 2 [mm]: 20,3
- Test Mark: E1 90R-02A0335 / 0283
- MAPP code available
- Item number: 13.0460-7228.2
- Our price: 51,48 €
- Manufacturer: ATE
- EAN number: 4006633306591
- Condition: New
-
- Fitting Position: Rear Axle
- for brake disc diameter [mm]: 302
- Brake System: Lucas / TRW
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 17,3
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 48,7
- Width [mm]: 106,0
- Test Mark: E1 90R-02A0258 / 0384
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 24.8190-0816.2
- Number of bolts / screws: 4
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2722.2
- Our price: 58,72 €
- Manufacturer: ATE
- EAN number: 4006633374507
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 300
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height 1 [mm]: 72,0
- Height 2 [mm]: 66,6
- Width 2 [mm]: 155,1
- Width 1 [mm]: 156,3
- Thickness 1 [mm]: 19,3
- Thickness 2 [mm]: 20,3
- Test Mark: E1 90R-02A0258 / 0284
- MAPP code available
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7228.2
- Our price: 77,39 €
- Manufacturer: ATE
- EAN number: 4006633347099
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Rear Axle
- Diameter [mm]: 302,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10,9
- Height [mm]: 50,8
- Surface: Coated
- Centering Diameter [mm]: 63,5
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 108,0
- Minimum thickness [mm]: 9,0
- Inner Diameter [mm]: 177,6
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0953
- Bore Diameter [mm]: 15,8
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0111-0145.1
- Manufacturer: ATE
- EAN number: 4006633309790
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Rim Size [inch]: 16
- Brake Size: 16"
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Product line: COATED DISC LINE
- Brake Disc Thickness [mm]: 28
- Height [mm]: 52
- Surface: Coated
- Centering Diameter [mm]: 64
- Number of Holes: 5
- Minimum thickness [mm]: 26
- Tightening Torque [Nm]: 170
- Drilled: no
- Item number: 09.A427.11
- Manufacturer: BREMBO
- EAN number: 8020584019382
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Vehicle Identification Number (VIN) to: FH999999
- Brake System: TRW
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 17
- Quantity Unit: Axle Set
- Height [mm]: 49
- Width [mm]: 107
- WVA Number: 24496
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws, with anti-squeak plate
- Item number: P 86 021
- Our price: 29,34 €
- Manufacturer: BREMBO
- EAN number: 8020584062630
- Condition: New
-
- Fitting Position: Front Axle
- Brake Size: 16"
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Product line: COAT Z
- Brake Disc Thickness [mm]: 28
- Height [mm]: 52
- Surface: Coated
- Centering Diameter [mm]: 64
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle 脴 [mm]: 108
- Minimum thickness [mm]: 26
- Weight [kg]: 8,70
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 250.1360.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238744863
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Rim Size [inch]: 16
- for brake disc diameter [mm]: 300
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Quantity Unit: Axle Set
- Height 1 [mm]: 66,4
- Height 2 [mm]: 72
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 20,2
- Thickness 2 [mm]: 20,2
- WVA Number: 24123, 24124
- Test Mark: E9 90R-01823 / 2047
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- FMSI Code: D1306-8421
- Friction Lining Material: Semi-Metallic
- Item number: LP1967
- Our price: 32,82 €
- Manufacturer: DELPHI
- EAN number: 5012759398869
- Condition: New
2 plain pads, 2 pads + spring clips
- Fitting Position: Rear Axle
- Wear Warning Contact: excl. wear warning contact
- Quantity Unit: Axle Set
- Length [mm]: 106,2
- Width [mm]: 48,4
- Thickness 1 [mm]: 16,8
- Test Mark: ECE R90 Approved
- Weight [kg]: 1,030
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- for brake disc diameter [mm]: 302
- Observe service information
- Item number: 16625
- Our price: 22,25 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816166252
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.