Opel Corsa C 1.6 Radiator fan switch (84 hp Petrol Z 16 SE)
- Rated Voltage [V]: 12
- Current Strength from [A]: 20
- Current Strength to [A]: 30
- Relay function: Normally open contact
- Item number: 206 689
- Our price: 6,75 €
- Manufacturer: TOPRAN
- EAN number: 2385640000015
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Rated Voltage [V]: 12
- Voltage [V]: 12
- Relay function: Normally open contact
- Current Strength [A]: 30
- Number of pins: 4
- Item number: 202 150
- Our price: 7,20 €
- Manufacturer: TOPRAN
- EAN number: 2386110000016
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Voltage [V]: 12
- Relay function: Terminal 30, Clamp 87
- Rated current [A]: 40
- Product line: Original Quality
- Fitting Position: Engine Compartment
- Packaging height [cm]: 4,2
- Packaging Depth [cm]: 2,8
- Item number: V15-71-0007
- Our price: 9,49 €
- Manufacturer: VEMO
- EAN number: 4046001270352
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Diameter [mm]: 260
- Brake Disc Type: Vented
- Brake System: TEVES
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Height [mm]: 41
- Material: Grey Cast Iron
- Surface: Coated
- Centering Diameter [mm]: 60
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 24
- Minimum thickness [mm]: 21
- Tightening Torque [Nm]: 110
- Machining: Untreated
- Colour: black
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Drilled: no
- Item number: C3X031ABE
- Manufacturer: ABE
- EAN number: 5900744151196
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 240
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 40,8
- Centering Diameter [mm]: 57
- Number of Holes: 4
- Thickness [mm]: 10
- Minimum thickness [mm]: 8,2
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: C4X015ABE
- Manufacturer: ABE
- EAN number: 5900427206946
- Condition: New
price incl. 19% VAT
-
- Construction Year to: 08 / 2005
- Fitting Position: Front Axle
- Diameter [mm]: 260,6
- Brake Disc Type: Vented, internally vented
- Brake Disc Thickness [mm]: 24
- Height [mm]: 41
- Surface: Oiled
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 21
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14,2
- Drilled: no
- Item number: 0 986 478 730
- Manufacturer: BOSCH
- EAN number: 3165143333907
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) to: 43999999
- Quantity Unit: Axle Set
- Brake System: Lucas
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 17
- Supplementary Article / Supplementary Info: with accessories
- Number of wear indicators [per axle]: 4
- Height 1 [mm]: 51,4
- Height 2 [mm]: 55,4
- Width 2 [mm]: 131,5
- Width 1 [mm]: 131,5
- WVA Number: 23225
- Weight [kg]: 1,3
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Packaging length [cm]: 15,2
- Packaging width [cm]: 8,8
- Packaging height [cm]: 8,4
- Item number: 2322501
- Our price: 31,76 €
- Manufacturer: TEXTAR
- EAN number: 4019722234385
- Condition: New
-
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) from: 43033899, 74000001
- Payload: for increased payload
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: with acoustic wear warning
- Height 1 [mm]: 76
- Height 2 [mm]: 69,6
- Width 2 [mm]: 155,1
- Width 1 [mm]: 156,5
- Thickness 1 [mm]: 19,6
- Thickness 2 [mm]: 20,6
- WVA Number: 23832
- Weight [kg]: 2
- Article number of recommended accessories: 82032000
- directional
- Observe mounting information
- Packaging length [cm]: 17
- Packaging width [cm]: 12
- Packaging height [cm]: 8,3
- Item number: 2383201
- Our price: 32,17 €
- Manufacturer: TEXTAR
- EAN number: 4019722259593
- Condition: New
- Diameter [mm]: 260
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Height [mm]: 41
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Minimum thickness [mm]: 21
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 09.8601.10
- Manufacturer: BREMBO
- EAN number: 8020584860113
- Condition: New
- Diameter [mm]: 260
- Brake Disc Type: internally vented, slotted
- Product line: MAX LINE
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Height [mm]: 41
- Surface: Coated
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Minimum thickness [mm]: 21
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 09.8601.75
- Manufacturer: BREMBO
- EAN number: 8020584860175
- Condition: New
For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
- Quantity Unit: Axle Set
- Brake System: Lucas
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 14
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: without accessories
- Number of wear indicators [per axle]: 1
- Height [mm]: 44
- Width [mm]: 96
- WVA Number: 23284
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Item number: P 59 037
- Our price: 29,96 €
- Manufacturer: BREMBO
- EAN number: 8020584055687
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) from: 74000001, 43033899
- Payload: for increased payload
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: with acoustic wear warning
- Supplementary Info: PRIME LINE - Ring
- Thickness [mm]: 20
- Supplementary Article / Supplementary Info: with accessories
- Number of wear indicators [per axle]: 2
- Height 1 [mm]: 70
- Height 2 [mm]: 76
- Width 2 [mm]: 156
- Width 1 [mm]: 155
- WVA Number: 23832, 23833, 23844
- Supplementary Article / Supplementary Info Info 2: with piston clip, with anti-squeak plate
- directional
- Item number: P 59 045
- Our price: 26,96 €
- Manufacturer: BREMBO
- EAN number: 8020584055762
- Condition: New
Achtung! Beläge sind an Laufrichtung gebunden. Bitte beim Einbau beachten.
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Fitting Position: Rear Axle
- Length [mm]: 104,9
- Width [mm]: 42,7
- Thickness 1 [mm]: 16,5
- Test Mark: ECE R90 Approved
- Weight [kg]: 0,919
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws, with fastening material
- for brake disc diameter [mm]: 264
- Observe service information
- Item number: 16445
- Our price: 19,19 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816164456
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Fitting Position: Rear Axle
- Length [mm]: 95,5
- Width [mm]: 42,5
- Thickness 1 [mm]: 14,7
- Test Mark: ECE R90 Approved
- Weight [kg]: 0,874
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with brake caliper screws, with fastening material
- Observe service information
- Item number: 16512
- Our price: 18,55 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816165125
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Fitting Position: Front Axle
- Length [mm]: 131,5
- Width [mm]: 52,8, 55,4
- Thickness 1 [mm]: 16
- Test Mark: ECE R90 Approved
- Weight [kg]: 1,25
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Observe service information
- Item number: 16748
- Our price: 22,59 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816167488
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Diameter [mm]: 264
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 42
- Centering Diameter [mm]: 57
- Number of Holes: 4
- Rim Hole Number: 4
- Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Drilled: no
- Item number: C4X017ABE
- Manufacturer: ABE
- EAN number: 5900427206960
- Condition: New
price incl. 19% VAT
-
- Construction Year to: 08 / 2005
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: Lucas-Girling
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 16,7
- Material: Low-Metallic
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 52,5
- Height 2 [mm]: 55,5
- Width [mm]: 131,6
- WVA Number: 23225
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with bolts / screws, with anti-squeak plate
- Article number of recommended accessories: 1987474241, 1987474447, 1987474382
- Number of bolts / screws: 2
- Observe technical data
- Item number: 0 986 424 527
- Our price: 29,59 €
- Manufacturer: BOSCH
- EAN number: 3165143301937
- Condition: New
- Diameter [mm]: 240
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 41
- Centering Diameter [mm]: 57
- Number of Holes: 4
- Minimum thickness [mm]: 8,2
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 08.9739.10
- Manufacturer: BREMBO
- EAN number: 8020584973912
- Condition: New
-
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) to: 43999999
- Quantity Unit: Axle Set
- Brake System: Lucas
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 17
- Supplementary Article / Supplementary Info: with accessories
- Number of wear indicators [per axle]: 2
- Height 1 [mm]: 51
- Height 2 [mm]: 55
- Width [mm]: 132
- WVA Number: 23225, 23226
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws, with anti-squeak plate
- Item number: P 59 036
- Our price: 26,14 €
- Manufacturer: BREMBO
- EAN number: 8020584055670
- Condition: New
- Quantity Unit: Axle Set
- Brake System: Lucas
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Number of wear indicators [per axle]: 2
- Height [mm]: 43
- Width [mm]: 96
- WVA Number: 23417, 23654, 23655
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws, with anti-squeak plate
- Item number: P 59 038
- Our price: 21,87 €
- Manufacturer: BREMBO
- EAN number: 8020584055694
- Condition: New