Mitsubishi Pajero 2 2.5 TD 4WD Timing belt tensioner pulley (99 hp Diesel 4D56-TD)
Recommended part replacement interval for your car for the part category Timing belt tensioner pulley: every 30.000 km
- Vehicle configuration line / variant: TENS
- Belt Pulley Ø [mm]: 58,0
- Height 1 [mm]: 21,0
- Height 2 [mm]: 28,5
- Weight [kg]: 0,5
- Supplementary Article / Supplementary Info: with holder
- Item number: 308T0022
- Our price: 15,45 €
- Manufacturer: RIDEX
- EAN number: 4059191410156
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- TecDoc Engine Number: 4D56-TD
- Construction Year from: 05 / 1991
- Diameter [mm]: 69
- Width [mm]: 33
- Item number: 308T0060
- Our price: 19,06 €
- Manufacturer: RIDEX
- EAN number: 4059191410095
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- TecDoc Engine Number: 4D56-TD
- Construction Year from: 05 / 1991
- Diameter [mm]: 69
- Width [mm]: 33
- Item number: SKTPT-0650059
- Our price: 12,30 €
- Manufacturer: STARK
- EAN number: 4059191128341
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Item number: 23581
- Our price: 14,71 €
- Manufacturer: MAPCO
- EAN number: 4043605259233
- Condition: New
- Driven Units: Balance shaft
- Diameter [mm]: 58,00
- Width [mm]: 22,50
- Item number: 57314
- Our price: 15,35 €
- Manufacturer: RUVILLE
- EAN number: 4011442184155
- Condition: New
- Vehicle configuration line / variant: TENS
- Belt Pulley Ø [mm]: 58,0
- Height 1 [mm]: 21,0
- Height 2 [mm]: 28,5
- Weight [kg]: 0,5
- Supplementary Article / Supplementary Info: with holder
- Item number: SKTPT-0650021
- Our price: 15,45 €
- Manufacturer: STARK
- EAN number: 4059191078080
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Width [mm]: 29
- Diameter [mm]: 58
- Weight [kg]: 0,393
- Observe service information
- Width of castor bearing surface [mm]: 20
- Item number: 10620
- Our price: 15,61 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816106203
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Width [mm]: 29
- Diameter [mm]: 58
- Weight [kg]: 0,393
- Observe service information
- Width of castor bearing surface [mm]: 20
- Item number: ADC47616
- Our price: 15,61 €
- Manufacturer: BLUE PRINT
- EAN number: 5050063476163
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 03 / 1991
- Driven Units: Balance shaft
-
- for model code: Pajero
- Driven Units: Balance shaft
- Width [mm]: 20,5
- Inner Diameter [mm]: 8
- Diameter [mm]: 58
- Item number: DTE-5506
- Our price: 15,69 €
- Manufacturer: KAVO PARTS
- EAN number: 8715616035729
- Condition: New
- Width 1 [mm]: 28
- Diameter [mm]: 58
- Item number: GT373.04
- Our price: 17,16 €
- Manufacturer: SNR
- EAN number: 3413520973643
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 03 / 1991
- Construction Year to: 04 / 2000
- Driven Units: Balance shaft
-
- Construction Year to: 10 / 1999
- Vehicle type: Pajero
- Driven Units: Balance shaft
- Surface: Smooth
- Material: Metal
- Diameter [mm]: 57
- Width [mm]: 23
- Supplementary Info: G-Force Redline�
- Item number: T42130
- Our price: 17,40 €
- Manufacturer: GATES
- EAN number: 5414465741852
- Condition: New
-
- Construction Year to: 10 / 1993
- Engine Code: 4D56
- Driven Units: Balance shaft
- for model code: V24C, V24W
- Construction Year from: 11 / 1993
- Diameter [mm]: 58
- Width [mm]: 21
- Tensioner Pulley Actuation: Manual
- Flange Diameter [mm]: 66
- Item number: VKM 75612
- Our price: 17,81 €
- Manufacturer: SKF
- EAN number: 7316577660121
- Condition: New
SKF recommends to use the complete kit
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 60,00
- Width [mm]: 34,00
- Item number: 57313
- Our price: 18,43 €
- Manufacturer: RUVILLE
- EAN number: 4011442184148
- Condition: New
-
- Construction Year from: 03 / 1991
- Driven Units: Balance shaft
-
- Construction Year from: 03 / 1991
- Driven Units: Balance shaft
-
- Driven Units: Balance shaft
- Width [mm]: 22,5
- Diameter [mm]: 58
- Item number: A37-0200
- Our price: 18,47 €
- Manufacturer: ACKOJA
- EAN number: 4046001956409
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Engine Code: 4D56T
- Width [mm]: 34
- Diameter [mm]: 60
- Weight [kg]: 0,300
- Observe service information
- Item number: 15279
- Our price: 19,25 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816152798
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Engine Code: 4D56T
- Width [mm]: 34
- Diameter [mm]: 60
- Weight [kg]: 0,614
- Observe service information
- Item number: ADC47612
- Our price: 19,29 €
- Manufacturer: BLUE PRINT
- EAN number: 5050063476125
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 10 / 1993
- Engine Code: 4D56
- Driven Units: Camshaft
- for model code: V24W, V24C
- Construction Year from: 11 / 1993
- Diameter [mm]: 60
- Width [mm]: 29
- Tensioner Pulley Actuation: Manual
- Flange Diameter [mm]: 70
- Item number: VKM 75601
- Our price: 20,49 €
- Manufacturer: SKF
- EAN number: 7316577654120
- Condition: New
SKF recommends to use the complete kit
price incl. 19% VAT
excl. delivery costs
- Width [mm]: 29
- Diameter [mm]: 58
- Weight [kg]: 0,393
- Observe service information
- Width of castor bearing surface [mm]: 20
- Item number: 80 03 0003
- Our price: 20,57 €
- Manufacturer: SWAG
- EAN number: 4044688106209
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Diameter [mm]: 60
- Width 1 [mm]: 33
- Item number: GT373.00
- Our price: 20,82 €
- Manufacturer: SNR
- EAN number: 3413520363017
- Condition: New
-
- TecDoc Engine Number: 4D56-TD
- Driven Units: Camshaft
- Width [mm]: 34
- Material: Metal
- Diameter [mm]: 60
- Item number: R0549
- Our price: 22,19 €
- Manufacturer: KAMOKA
- EAN number: 2238119171406
- Condition: New
- 1
- 2
- 3
- 4