TOYOTA Harrier II (XU30) 3.0 4WD Track rod end (223 hp Petrol 1MZ-FE)
- Fitting Position: Front Axle, outer
- Length [mm]: 171
- Internal Thread [mm]: M15x1.5
- External Thread [mm]: M12x1.25
- Cone Size [mm]: 13,5
- Supplementary Article / Supplementary Info: with accessories
- Item number: 914T1135
- Manufacturer: RIDEX
- EAN number: 4067448591053
- Condition: New
- Fitting Position: Front Axle
- Length [mm]: 170
- Internal Thread [mm]: M15XP1.5
- Cone Size [mm]: 13,5
- Cone Pitch: 1 / 6
- Thread Size: M12XP1.25
- Weight [g]: 682
- Supplementary Article / Supplementary Info Info 2: with nut
- Packaging width [cm]: 8,5
- Packaging height [cm]: 4,5
- Gross Weight [g]: 738
- Item number: CE0739
- Manufacturer: CTR
- EAN number: 224401179337231793372
- Condition: New
- Fitting Position: Front Axle Right, outer
- Length [mm]: 191
- Internal Thread [mm]: M15x1.5
- Thread Size 1: M12x1,25
- Thread Size 2: M15x1,5
- Cone Size [mm]: 12,6
- Cone Pitch: 1:6
- paired article number: JTE7571
- Thread Type: with right-hand thread
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Item number: JTE7572
- Manufacturer: TRW
- EAN number: 3322937575053
- Condition: New
- Fitting Position: Front Axle, outer
- Length [mm]: 171
- Internal Thread [mm]: M15x1.5
- External Thread [mm]: M12x1.25
- Cone Size [mm]: 13,5
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Item number: JTE7751
- Manufacturer: TRW
- EAN number: 3322938101275
- Condition: New
- Fitting Position: outer, Left, Right
- Cone Size [mm]: 13,6
- Cone Pitch: 1 / 8
- Weight [kg]: 0,4
- Thread Size: R-M14脳1,5, R-M12脳1,25
- Item number: SE-7311
- Manufacturer: 555
- EAN number: 4582447007737
- Condition: New
- Fitting Position: Front Axle Left, Front Axle Right
- Length [mm]: 191
- Weight [kg]: 0,64
- Thickness [mm]: 77
- Spanner Size: 19
- Supplementary Article / Supplementary Info Info 2: with crown nut
- Observe service information
- Internal Thread Size: M15 x 1,5
- External Thread Size: M12 x 1,25
- Item number: 43184
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816431848
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle Left, Front Axle Right
- Length [mm]: 191
- Weight [kg]: 0,640
- Thickness [mm]: 77
- Spanner Size: 19
- Supplementary Article / Supplementary Info Info 2: with crown nut
- Internal Thread Size: M14 x 1,5
- External Thread Size: M12 x 1,25
- Item number: ADT387153
- Manufacturer: BLUE PRINT
- EAN number: 5050063631494
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle Left, Front Axle Right
- Item number: 39010 01
- Manufacturer: 尝贰惭贵脰搁顿贰搁
- EAN number: 4047437478886
- Condition: New
- Fitting Position: Front Axle Left, Front Axle Right
- Length [mm]: 191
- Weight [kg]: 0,64
- Thickness [mm]: 77
- Spanner Size: 19
- Supplementary Article / Supplementary Info Info 2: with crown nut
- Internal Thread Size: M14 x 1,5
- External Thread Size: M12 x 1,25
- Item number: 81 94 3184
- Manufacturer: SWAG
- EAN number: 4044688431844
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle Left, Front Axle Right
- Weight [kg]: 0,64
- Packaging height [cm]: 7,5
- Packaging Depth [cm]: 7,5
- Item number: A70-0308
- Manufacturer: ACKOJA
- EAN number: 4062375087389
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: outer, Left, Right
- Cone Size [mm]: 12,5
- Cone Pitch: 1 / 6
- Weight [kg]: 0,4
- Thread Size: R-M14脳1,5, R-M12脳1,25
- Item number: SE-2651
- Manufacturer: 555
- EAN number: 4582447004842
- Condition: New
price incl. 19% VAT
- Fitting Position: Front axle both sides
- Length [mm]: 172
- Weight [kg]: 0,653
- External Thread 2 [mm]: M12x1,25
- Internal Thread 1 [mm]: M15x1,5
- Item number: 91-02597
- Manufacturer: RTS
- EAN number: 22107203865443386544
- Condition: New
- Fitting Position: outer, Left, Right
- Cone Size [mm]: 12,5
- Cone Pitch: 1 / 6
- Weight [kg]: 0,32
- Thread Size: R-M15脳1,5, R-M12脳1,25
- Item number: SE-2931
- Manufacturer: 555
- EAN number: 4582447005184
- Condition: New
- Fitting Position: outer, Left, Right
- Cone Size [mm]: 13,4
- Cone Pitch: 1 / 8
- Weight [kg]: 0,34
- Thread Size: R-M12脳1,25, R-M10脳1,25
- Item number: SE-7301
- Manufacturer: 555
- EAN number: 4582447007720
- Condition: New
- Fitting Position: outer, Left, Right
- Cone Size [mm]: 13,4
- Cone Pitch: 1 / 8
- Weight [kg]: 0,35
- Thread Size: R-M14脳1,5, R-M10脳1,25
- Item number: SE-B011
- Manufacturer: 555
- EAN number: 4582447008185
- Condition: New
- Fitting Position: outer, Left, Right
- Cone Size [mm]: 13,5
- Cone Pitch: 1 / 6
- Weight [kg]: 0,665
- Thread Size: R-M15脳1,5, R-M12脳1,25
- Item number: SE-3903
- Manufacturer: 555
- EAN number: 4582447006013
- Condition: New
price incl. 19% VAT
- Fitting Position: outer, Right
- Cone Size [mm]: 13,5
- Cone Pitch: 1 / 6
- Weight [kg]: 0,775
- Thread Size: R-M15脳1,5, R-M12脳1,25
- Item number: SE-T351R
- Manufacturer: 555
- EAN number: 4582447008932
- Condition: New
- Packaging: Plastic Case
- Number of Parts [parts]: 9
- Material: Tool Steel
- Weight [g]: 2800
- Item number: 700.1685
- Our price: 388,22 €
- Manufacturer: KS TOOLS
- EAN number: 4042146640791
- Condition: New
Locking screw 1 鈥deally suited to the correct gear rack centre positioning of the steering in order to also carry out the camber initial installation
鈥nsert screws after ensuring floor consistency of the steering with the housing boreholes
鈥pecial tool steel
Application range: Mercedes W107, W114, W115, W116
price incl. 19% VAT
- Inner Diameter [mm]: 48
- Material: Rubber
- Fitting Position: Front Axle Left, Front Axle Right
- Height [mm]: 205
- Inner Diameter 2 [mm]: 11, 18, 26, 38, 45, 36, 44, 50, 57
- Weight [kg]: 0,14
- Item number: 17080
- Our price: 15,76 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816170808
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: outer, Left, Right
- Cone Size [mm]: 13,3
- Cone Pitch: 1 / 10
- Weight [kg]: 0,35
- Thread Size: R-M14脳1,5, R-M10脳1,25
- Item number: SE-7161
- Manufacturer: 555
- EAN number: 224010130546021305460
- Condition: New
- 1
- 2