HAZET Air impact wrenches
- Operating Mode: Manual (hand operated)
- Length [mm]: 165
- Also available as set
- Net weight [kg]: 0,8
- Output end (profile): Hexagon
- Hex drive tang dim. [mm (in)]: 8 (5 / 16")
- Item number: 2272
- Our price: 100,48 €
- Manufacturer: HAZET
- EAN number: 4000896015979
- Condition: New
HAZET Impact bit screwdriver 2272 鈭� Hexagon, hollow 8 mm 鈥mpact operation of tight screw connections
(5/16 inch) 鈥p to 80聽Nm loosening and tightening torque
鈥witchable (right- and left-hand threads)
鈥retension impact screwdriver by rotating the handle left (loosening or right-hand thread) or right (tightening or left-hand thread) before every impact. Hit the head section of the impact screwdriver with a 300聽g hammer
鈥o electricity, compressed air or other resources needed
鈥utput: Hexagon, hollow 8 mm (5/16 inch)
鈥imensions / length: 165 mm
鈥et weight: 0.8 kg
price incl. 19% VAT
excl. delivery costs
- Operating Pressure [bar]: 6,3
- Spanner Size: 16 M
- RPM to [rpm]: 10000
- Tightening torque to [Nm]: 678, 500,07
- Release Torque [Nm]: 1100
- Torque to [Nm]: 610
- Tool handle type: Cold-insulating handle
- Hose Diameter [mm]: 10
- Air Consumption [l / min]: 127
- Vibration Acceleration [m / s虏]: 9,57
- Noise Level [dB]: 97,5
- Air Connection Thread: 12.91 (1 / 4")
- Thread Type: Internal Thread
- Net Weight [g]: 1242
- Type of Impact Mechanism: Jumbo Hammer Mechanism
- Net weight [kg]: 1,24
- Output end (profile): Rectangle
- Square drive tang dimensions [mm (in)]: 12.5 (1 / 2")
- recommended Torque [Nm]: 610
- Item number: 9012M
- Our price: 201,10 €
- Manufacturer: HAZET
- EAN number: 4000896188987
- Condition: New
HAZET Impact wrench 鈭� extra short 9012M 鈭� Maximum loosening 鈥aximum loosening torque: 1100 Nm
torque: 1100 Nm 鈭� Square, solid 12.5 mm (1/2 inch) 鈭� Single hammer striking mechanism 鈥xtremely compact construction enables working in areas with restricted access
鈥ne-hand operation for right and left handed operators
鈥xhaust air is guided through the handle downwards
鈥educed vibrations
鈥asy handling
鈥xtra short 鈥� only 92聽mm
鈥ingle hammer striking mechanism
鈥ir connection inlet: Inside thread 12.91 mm (1/4鈥�)
鈥oupler plug: Nominal size 7.2 (included)
鈥ecommended torque: 610 Nm
鈥ose diameter (recommended): 10 mm
鈥orking pressure (bar): 6.3
鈥ound power level: 108.1 db(A) Lp W
鈥ibration acceleration: 9.57 m/s2
鈥oosening torque (max) determined with screw size M: 16
鈥orward and reverse: three-stage (forward), single-stage (reverse)
鈥old insulated handle
鈥utput: Square, solid 12.5 mm (1/2 inch)
鈥et weight: 1.24 kg
鈥ightening torque max.: 678 Nm
鈥aximum loosening torque: 1100 Nm
鈥ound pressure level: 97.1 dB(A) Lp A
鈥evolutions per minute: 10000
鈥ir requirement: 127 l/min (2.1 l/sec)
price incl. 19% VAT
- Operating Pressure [bar]: 6,3
- Spanner Size: 16 M
- RPM to [rpm]: 7000
- Tightening torque to [Nm]: 750, 553,17
- Release Torque [Nm]: 850
- Torque to [Nm]: 550
- Tool handle type: Cold-insulating handle
- Hose Diameter [mm]: 10
- Air Consumption [l / min]: 127,4
- Vibration Acceleration [m / s虏]: 7,42
- Noise Level [dB]: 92,1
- Air Connection Thread: 12.91 (1 / 4")
- Thread Type: Internal Thread
- Net Weight [g]: 2600
- Type of Impact Mechanism: Pin Impact Mechanism
- Net weight [kg]: 2,6
- Output end (profile): Rectangle
- Square drive tang dimensions [mm (in)]: 12.5 (1 / 2")
- recommended Torque [Nm]: 550
- Item number: 9012SPC
- Our price: 217,10 €
- Manufacturer: HAZET
- EAN number: 4000896119639
- Condition: New
HAZET Impact wrench 9012SPC 鈭� Maximum loosening torque: 850 鈥aximum loosening torque: 850 Nm
Nm 鈭� Square, solid 12.5 mm (1/2 inch) 鈭� Powerful pin clutch mechanism 鈥nhanced power characteristics due to new, specially developed air motor as well as efficient air guide and improved pull-up torque of the air motor
鈥pecially heat-treated inner parts for minimised wear
鈥xhaust air is guided through the handle downwards
鈥educed vibrations
鈥asy handling
鈥owerful pin clutch mechanism
鈥ir connection inlet: Inside thread 12.91 mm (1/4鈥�)
鈥oupler plug: Nominal size 7.2 (included)
鈥ecommended torque: 550 Nm
鈥ose diameter (recommended): 10 mm
鈥orking pressure (bar): 6.3
鈥ound power level: 103.1 db(A) Lp W
鈥ibration acceleration: 7.42 m/s2
鈥oosening torque (max) determined with screw size M: 16
鈥orward and reverse: three-stage (forward), single-stage (reverse)
鈥old insulated handle
鈥utput: Square, solid 12.5 mm (1/2 inch)
鈥et weight: 2.6 kg
鈥ightening torque max.: 750 Nm
鈥aximum loosening torque: 850 Nm
鈥ound pressure level: 92.1 dB(A) Lp A
鈥evolutions per minute: 7000
鈥ir requirement: 127.4 l/min (2.1 l/sec)
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Operating Pressure [bar]: 6,3
- Spanner Size: 13 M
- RPM to [rpm]: 6500
- Tightening torque to [Nm]: 461, 340,02
- Release Torque [Nm]: 461
- Torque to [Nm]: 375
- Tool handle type: Cold-insulating handle
- Hose Diameter [mm]: 10
- Air Consumption [l / min]: 85,2
- Vibration Acceleration [m / s虏]: 7,78
- Noise Level [dB]: 90,3
- Air Connection Thread: 12.91 (1 / 4")
- Thread Type: Internal Thread
- Net Weight [g]: 1240
- Type of Impact Mechanism: Jumbo Hammer Mechanism
- Net weight [kg]: 1,24
- Output end (profile): Rectangle
- Square drive tang dimensions [mm (in)]: 10 (3 / 8")
- recommended Torque [Nm]: 375
- Item number: 9011M
- Our price: 231,58 €
- Manufacturer: HAZET
- EAN number: 4000896201570
- Condition: New
HAZET Impact wrench 鈭� extra short 9011M 鈭� Maximum loosening 鈥aximum loosening torque: 461 Nm
torque: 461 Nm 鈭� Square, solid 10 mm (3/8 inch) 鈭� Single hammer striking mechanism 鈥xtremely compact construction enables working in areas with restricted access
鈥ne-hand operation for right and left handed operators
鈥xhaust air is guided through the handle downwards
鈥educed vibrations
鈥asy handling
鈥xtra short 鈥� only 92聽mm
鈥ingle hammer striking mechanism
鈥ir connection inlet: Inside thread 12.91 mm (1/4鈥�)
鈥oupler plug: Nominal size 7.2 (included)
鈥ecommended torque: 375 Nm
鈥ose diameter (recommended): 10 mm
鈥orking pressure (bar): 6.3
鈥ound power level: 101.3 db(A) Lp W
鈥ibration acceleration: 7.78 m/s2
鈥oosening torque (max) determined with screw size M: 13
鈥orward and reverse: three-stage (forward), single-stage (reverse)
鈥old insulated handle
鈥utput: Square, solid 10 mm (3/8 inch)
鈥et weight: 1.24 kg
鈥ightening torque max.: 461 Nm
鈥aximum loosening torque: 461 Nm
鈥ound pressure level: 90.3 dB(A) Lp A
鈥evolutions per minute: 6500
鈥ir requirement: 85.2 l/min (1.4 l/sec)
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Operating Pressure [bar]: 6,3
- Spanner Size: 16 M
- RPM to [rpm]: 8000
- Tightening torque to [Nm]: 1054, 777,39
- Release Torque [Nm]: 1700
- Torque to [Nm]: 881
- Tool handle type: Cold-insulating handle
- Hose Diameter [mm]: 10
- Air Consumption [l / min]: 139
- Vibration Acceleration [m / s虏]: 10,23
- Noise Level [dB]: 98
- Air Connection Thread: 12.91 (1 / 4")
- Thread Type: Internal Thread
- Net Weight [g]: 1980
- Type of Impact Mechanism: Double Hammer Mechanism
- Net weight [kg]: 1,98
- Output end (profile): Rectangle
- Square drive tang dimensions [mm (in)]: 12.5 (1 / 2")
- recommended Torque [Nm]: 881
- Item number: 9012EL-SPC
- Our price: 337,47 €
- Manufacturer: HAZET
- EAN number: 4000896188444
- Condition: New
HAZET Impact wrench 9012EL-SPC 鈭� Maximum loosening torque: 鈥aximum loosening torque: 1700 Nm
1700 Nm 鈭� Square, solid 12.5 mm (1/2 inch) 鈭� Powerful twin hammer mechanism 鈥ne-hand operation by changeover on rear of device
鈥xhaust air is guided through the handle downwards
鈥educed vibrations
鈥asy handling
鈥owerful twin hammer mechanism
鈥ir connection inlet: Inside thread 12.91 mm (1/4鈥�)
鈥oupler plug: Nominal size 7.2 (included)
鈥ecommended torque: 881 Nm
鈥ose diameter (recommended): 10 mm
鈥orking pressure (bar): 6.3
鈥ound power level: 109 db(A) Lp W
鈥ibration acceleration: 10.23 m/s2
鈥oosening torque (max) determined with screw size M: 16
鈥orward and reverse: four-stage (counterclockwise rotation), single-stage (clockwise rotation)
鈥old insulated handle
鈥utput: Square, solid 12.5 mm (1/2 inch)
鈥et weight: 1.98 kg
鈥ightening torque max.: 1054 Nm
鈥aximum loosening torque: 1700 Nm
鈥ound pressure level: 98 dB(A) Lp A
鈥evolutions per minute: 8000
鈥ir requirement: 139 l/min (2.3 l/sec)
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- RPM from [1 / min] 0
- RPM to [rpm]: 2500
- Release Torque [Nm]: 270
- Rechargeable Battery Type: Li-Ion Rechargeable Battery
- Number of tools: 3
- Rechargeable Battery Voltage [V]: 18
- Vibration Acceleration [m / s虏]: 15,40
- Idle Speed [rpm] 0
- Noise Level [dB]: 99,6
- Square Drive Tang Size [mm (inch)]: 12.5 (1 / 2")
- Sound Power Level [dB]: 110,6
- Net Weight [g]: 1340
- Net weight [kg]: 1,34
- maximum tightening torque (+5 Nm) [Nm]: 220
- Torque to [lbf路ft]: 162,26
- recommended Torque [Nm]: 220
- Item number: 9212M-1
- Our price: 424,50 €
- Manufacturer: HAZET
- EAN number: 4000896212446
- Condition: New
Application: HAZET Mini cordless impact wrench set 鈭� 18聽V 9212M-1 鈭� Maximum loosening torque: 270 Nm 鈭� Square, solid 12.5 mm Work independently
(1/2 inch) 鈭� Number of tools: 3 鈥igh efficiency thanks to brushless motor
鈥andy, short and lightweight tool
鈥�3-piece set 鈭� in textile bag: 1 cordless impact wrench 1 quick charger (40 minutes) 1 Li-ion rechargeable batteries 18聽V, 2聽Ah
鈥here are three power stages to choose from for torque acceleration: Stage 1 100 Nm at 0 鈥� 700 rpm (0 鈥� 1200 impacts/min) Stage 2 190 Nm at 0 鈥� 1600 rpm (0 鈥� 2000 impacts/min) Stage 3 220 Nm at 0 鈥� 2500 rpm (0 鈥� 3200 impacts/min)
鈥mperage without load: 4.5聽A
鈥harging time ~ 35 minutes
鈥rushless DC motor (BLDC):
鈥onger service life, less wear, no need to change the carbon brushes
鈥igh efficiency and hence less battery consumption
鈥ore compact motor allows for smaller installation dimensions
鈥llumination of the work area before the output begins to move
鈥i-Ion rechargeable battery with very low self-discharge (only 2%) compared to a standard NiMH rechargeable battery (15鈥夆�撯��25%)
鈥et weight: 0.96聽kg (without rechargeable battery)
鈥attery net weight: 0.37聽kg (only sets 9212聽M-1 and 9212聽M-1/4)
鈥attery charger net weight: 0.66聽kg (only sets 9212聽M-1 and 9212聽M-1/4)
鈥imensions including rechargeable battery: 228聽x聽63聽x聽135聽mm
鈥ncluding belt clip, attachable on both sides, and hand strap
鈥ecommended torque: 220 Nm
鈥ound power level: 110.6 db(A) Lp W
鈥ibration acceleration: 15.40 m/s2
鈥oosening torque (max) determined with screw size M: 16
鈥utput: Square, solid 12.5 mm (1/2 inch)
鈥et weight: 1.34 kg
鈥ightening torque max.: 220 Nm
鈥aximum loosening torque: 270 Nm
鈥ound pressure level: 99.6 dB(A) Lp A
鈥evolutions per minute: 0鈥夆�撯��2500
Do you know 鈥� Li-Ion batteries:
鈥o not have any memory effect
鈥onsist of cells with 3.6聽V each
鈥fter full charge they have a higher voltage than 3.6 V i.e. 5 cells each 3.6 V = 18 V 鈥� but after full charge a peak voltage of up to 20 V is possible Attention: For a longer lifetime of the battery please store it charged up to 50 to 80聽% only
鈥ave an energy density which is twice as high as nickel cadmium batteries, for example
鈥ave a nominal voltage three times higher than a nickel metal hydride battery
鈥equire multiple complete charging cycles to reach full capacity
鈥umber of tools: 3
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Operating Pressure [bar]: 6,3
- RPM to [rpm]: 7300
- Release Torque [Nm]: 1890
- Tool handle type: Cold-insulating handle
- Hose Diameter [mm]: 10
- Air Consumption [l / min]: 153
- Vibration Acceleration [m / s虏]: 7,47
- Noise Level [dB]: 104
- Sound Power Level [dB]: 93
- Nominal Size [mm]: 7,2
- Net Weight [g]: 2100
- Net weight [kg]: 2,1
- maximum tightening torque (+5 Nm) [Nm]: 1085
- Torque to [lbf路ft]: 800,25
- recommended Torque [Nm]: 922
- Item number: 9013M
- Our price: 692,28 €
- Manufacturer: HAZET
- EAN number: 4000896212347
- Condition: New
Application: HAZET Impact wrench 9013M 鈭� Maximum loosening torque: 1890 Application on SUVs, transport vehicles, trucks, Nm 鈭� Square, solid 20 mm (3/4 inch) 鈭� Powerful twin hammer agricultural machinery as well as for industrial machine and mechanism naval construction
鈥aximum loosening torque: 1890 Nm
鈥xhaust air is guided through the handle downwards
鈥educed vibrations
鈥asy handling
鈥�20聽mm (3鈦�4鈥�) impact wrench in 12.5聽mm (1鈦�2鈥�) housing size
鈥owerful twin hammer mechanism
鈥ir connection inlet: Inside thread 16.41 mm (3/8鈥�)
鈥oupler plug: Nominal size 7.2 (included)
鈥ecommended torque: 922 Nm
鈥ose diameter (recommended): 10 mm
鈥orking pressure (bar): 6.3
鈥ound power level: 93 db(A) Lp W
鈥ibration acceleration: 7.47 m/s2
鈥oosening torque (max) determined with screw size M: 32
鈥orward and reverse: three-stage (forward), single-stage (reverse)
鈥old insulated handle
鈥utput: Square, solid 20 mm (3/4 inch)
鈥et weight: 2.1 kg
鈥ightening torque max.: 1085 Nm
鈥aximum loosening torque: 1890 Nm
鈥ound pressure level: 104 dB(A) Lp A
鈥evolutions per minute: 7300
鈥ir requirement: 153 l/min (2.5 l/sec)
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Diameter 2 [mm]: 27,5
- Drive [mm]: 30
- Depth [mm]: 12
- Length [mm]: 38
- Material: Chrome Vanadium Steel, Nickel-Chrome-Molybdenum
- Surface: Phosphatized, Oiled
- DIN / ISO: DIN 3129, ISO 2725-2
- Drive side (profile): Rectangle
- Square Drive Tang Size [mm (inch)]: 12.5 (1 / 2")
- Connector type: Traction profile
- Operating Mode: for machine actuation
- Net weight [kg]: 0,13
- Spanner Size 1 [mm]: 18
- Output end (profile): Male Hex
- Item number: 900S-18
- Our price: 9,39 €
- Manufacturer: HAZET
- EAN number: 4000896044283
- Condition: New
HAZET Impact socket 鈭� hexagon 900S-18 鈭� Square, hollow 12.5 鈥ith borehole for locking pin or safety spring and grove for O-ring mm (1/2 inch) 鈭� Outside hexagon traction profile 鈭� 18 mm
鈥urface: phosphatized, oiled
鈥IN 3129, ISO 2725-2
鈥ade in Germany
鈥rive: Square, hollow 12.5 mm (1/2 inch)
鈥utput: Outside hexagon traction profile
鈥rench size: 18 mm
鈥imensions / length: 38 mm
鈥iameter d1 (output side): 27.5 mm
鈥iameter d2 (drive side): 30 mm
鈥et weight: 0.13 kg
鈥or impact operation
price incl. 19% VAT
excl. delivery costs
- Diameter 2 [mm]: 24,8
- Drive [mm]: 30
- Depth [mm]: 11
- Length [mm]: 38
- Material: Chrome Vanadium Steel, Nickel-Chrome-Molybdenum
- Surface: Phosphatized, Oiled
- DIN / ISO: DIN 3129, ISO 2725-2
- Drive side (profile): Rectangle
- Square Drive Tang Size [mm (inch)]: 12.5 (1 / 2")
- Connector type: Traction profile
- Operating Mode: for machine actuation
- Net weight [kg]: 0,13
- Spanner Size 1 [mm]: 16
- Output end (profile): Male Hex
- Item number: 900S-16
- Our price: 12,38 €
- Manufacturer: HAZET
- EAN number: 4000896044214
- Condition: New
HAZET Impact socket 鈭� hexagon 900S-16 鈭� Square, hollow 12.5 鈥ith borehole for locking pin or safety spring and grove for O-ring mm (1/2 inch) 鈭� Outside hexagon traction profile 鈭� 16 mm
鈥urface: phosphatized, oiled
鈥IN 3129, ISO 2725-2
鈥ade in Germany
鈥rive: Square, hollow 12.5 mm (1/2 inch)
鈥utput: Outside hexagon traction profile
鈥rench size: 16 mm
鈥imensions / length: 38 mm
鈥iameter d1 (output side): 24.8 mm
鈥iameter d2 (drive side): 30 mm
鈥et weight: 0.13 kg
鈥or impact operation
- Diameter 2 [mm]: 28,4
- Drive [mm]: 30
- Spanner Size: 17 mm
- Depth [mm]: 18
- Length [mm]: 87
- Drive side (profile): Rectangle
- Square Drive Tang Size [mm (inch)]: 12.5 (1 / 2")
- Bolt Head- / Nut Design: Hybrid special profile (Mercedes-Benz)
- Weight [g]: 238
- Manufacturer Restriction: MERCEDES-BENZ
- short version
- Item number: 905SLG-17
- Our price: 14,57 €
- Manufacturer: HAZET
- EAN number: 4000896198795
- Condition: New
Application: HAZET Impact socket 鈭� hybrid special profile 905SLG-17 鈭� Especially for wheel mounting and dismounting of light-alloy Square, hollow 12.5 mm (1/2 inch) 鈭� Wheel bolts hybrid rims for hybrid wheel bolts in all new MERCEDES-BENZ special profile 鈭� 17 mm vehicles
鈥ptimised external contour for better protection of deep rim holes
鈥n e.g. MERCEDES-BENZ C-Class type 204, 204X 鈭� E-Class type 211, 212, 207 鈭� SLK type 172 鈭� M-Class type 164, 166 鈭� S-Class type 221, 222 鈭� CL-Class type 216
鈥lastic insert to protect the surface of the wheel bolts
鈥otating outside plastic sleeve to protect the rims when screwing the wheel bolts - no aluminium corrosion through prevention of scratches
鈥ong design
鈥ith borehole for locking pin or safety spring and grove for O-ring
鈥ade in Germany
鈥rive: Square, hollow 12.5 mm (1/2 inch)
鈥utput: Wheel bolts hybrid special profile
鈥rench size: 17 mm
鈥imensions / length: 86 mm
鈥iameter d1 (output side): 28.4 mm
鈥iameter d2 (drive side): 30 mm
鈥or impact operation
- Spanner Size: M18
- Length [mm]: 6, 43
- Material: Chrome Vanadium Steel, Nickel-Chrome-Molybdenum
- Surface: Phosphatized, Oiled
- for article number: 1003S-1, 1007S-7 / 4
- Drive side (profile): Rectangle, Male Hex
- Square Drive Tang Size [mm (inch)]: 12.5 (1 / 2")
- Supplementary Info: XZN
- short version
- Operating Mode: for machine actuation
- Net weight [kg]: 0,1
- Profile Width [mm]: 24
- Output end (profile): Female Star
- Item number: 990S-18
- Our price: 14,65 €
- Manufacturer: HAZET
- EAN number: 4000896160860
- Condition: New
Application: HAZET Impact screwdriver socket 990S-18 鈭� Square, hollow 12.5 mm (1/2 inch), Outside hexagon 24 mm 鈭� Internal Screw connections on commercial vehicles and passenger cars serration profile XZN 鈭� M18 with XZN profile e.g. on chassis, brake system (brake carriers), engines, shock absorbers and camshaft sprocketInstallation and removal of the wheel bearing / hub unit e.g. VW Touran, model year聽2004聽鈫�, AUDI A3, model year聽2004 鈫�, Golf 5 and identical 艩KODA
鈥hoice of Inside square drive 12.5聽=聽1/2鈥� or Outside hexagon 24聽mm
鈥hort design
鈥ith borehole for locking pin or safety spring and grove for O-ring
鈥urface: phosphatized, oiled
鈥ade in Germany
鈥rive: Square, hollow 12.5 mm (1/2 inch), Outside hexagon 24 mm
鈥utput: Internal serration profile XZN
鈥rench size: 鈭� M18
鈥imensions / length: 43 mm
鈥ength l1: 6 mm
鈥et weight: 0.1 kg
鈥or impact operation
- Diameter 2 [mm]: 31
- Drive [mm]: 30
- Depth [mm]: 19,8
- Length [mm]: 87
- Drive side (profile): Rectangle
- Square Drive Tang Size [mm (inch)]: 12.5 (1 / 2")
- Bolt Head- / Nut Design: Hybrid special profile (Mercedes-Benz)
- Manufacturer Restriction: KIA
- short version
- Operating Mode: for machine actuation
- Spanner Size 1 [mm]: 21
- Item number: 905SLG-21
- Our price: 15,38 €
- Manufacturer: HAZET
- EAN number: 4000896201624
- Condition: New
HAZET Impact socket 鈭� special profile 905SLG-21 鈭� Square, 鈥lastic insert to protect the surface of the wheel bolts
hollow 12.5 mm (1/2 inch) 鈭� Wheel bolts hybrid special profile 鈭� 21 mm 鈥otating outside plastic sleeve to protect the rims when screwing the wheel bolts - no aluminium corrosion through prevention of scratches
鈥heel nuts with special profile Wrench size 21聽mm on HYUNDAI i30, Tucson and KIA
鈥ong design
鈥ith borehole for locking pin or safety spring and grove for O-ring
鈥ade in Germany
鈥rive: Square, hollow 12.5 mm (1/2 inch)
鈥utput: Wheel bolts hybrid special profile
鈥rench size: 21 mm
鈥imensions / length: 86.8 mm
鈥iameter d1 (output side): 31 mm
鈥iameter d2 (drive side): 30 mm
鈥or impact operation
price incl. 19% VAT
excl. delivery costs
- Diameter 2 [mm]: 28,8
- Drive [mm]: 30
- Depth [mm]: 11
- Length [mm]: 29
- Material: Chrome Vanadium Steel, Nickel-Chrome-Molybdenum
- Surface: Phosphatized, Oiled
- DIN / ISO: DIN 3129, ISO 2725-2
- Drive side (profile): Rectangle
- Square Drive Tang Size [mm (inch)]: 12.5 (1 / 2")
- Connector type: Traction profile
- short version
- Operating Mode: for machine actuation
- Spanner Size 1 [mm]: 19
- Output end (profile): Male Hex
- Item number: 900SK-19
- Our price: 16,31 €
- Manufacturer: HAZET
- EAN number: 4000896201761
- Condition: New
HAZET Impact socket 鈭� hexagon 900SK-19 鈭� Square, hollow 12.5 鈥xtra short design
mm (1/2 inch) 鈭� Outside hexagon traction profile 鈭� 19 mm 鈥ith borehole for locking pin or safety spring and grove for O-ring
鈥urface: phosphatized, oiled
鈥IN 3129, ISO 2725-2
鈥ade in Germany
鈥rive: Square, hollow 12.5 mm (1/2 inch)
鈥utput: Outside hexagon traction profile
鈥rench size: 19 mm
鈥imensions / length: 29 mm
鈥or impact operation
price incl. 19% VAT
excl. delivery costs
- Length [mm]: 50
- DIN / ISO: DIN 3121, ISO 1173 E6,3 (1 / 4鈥�)
- Drive side (profile): Hexagon
- Manufactured in: Germany
- Operating Mode: for machine actuation
- Net weight [kg]: 0,01
- Hexagonal Drive Tang Size [mm (inch)]: 6.3 (1 / 4")
- Output end (profile): Rectangle
- Square drive tang dimensions [mm (in)]: 6.3 (1 / 4")
- Item number: 8508S-3
- Our price: 7,42 €
- Manufacturer: HAZET
- EAN number: 4000896037414
- Condition: New
Application: HAZET Impact adapter 8508S-3 鈭� Hexagon, solid 6.3 (1/4 inches) 鈭� Square, solid 6.3 mm (1/4 inch) Use in power screwdrivers, e.g. AEG, Atlas Copco, Black / Decker, Bosch
鈥utside hexagon ISO 1173-E聽6.3 (1鈦�4鈥�)
鈥ith locking pin retaining
鈥IN 3121, ISO 1173 E6,3 (1/4鈥�)
鈥ade in Germany
鈥rive: Hexagon, solid 6.3 (1/4 inches)
鈥utput: Square, solid 6.3 mm (1/4 inch)
鈥imensions / length: 50 mm
鈥et weight: 0.01 kg
鈥or impact operation
- Length [mm]: 130
- Material: Chrome Vanadium Steel, Nickel-Chrome-Molybdenum
- Surface: Phosphatized, Oiled
- DIN / ISO: DIN 3121
- Drive side (profile): Rectangle
- Square Drive Tang Size [mm (inch)]: 12.5 (1 / 2")
- Operating Mode: for machine actuation
- Net weight [kg]: 0,26
- Output end (profile): Rectangle
- Square drive tang dimensions [mm (in)]: 12.5 (1 / 2")
- Item number: 9005S-5
- Our price: 43,98 €
- Manufacturer: HAZET
- EAN number: 4000896043163
- Condition: New
HAZET Impact extension 9005S-5 鈭� Square, hollow 12.5 mm (1/2 solid 鈥ith borehole for locking pin or safety spring and grove for O-ring inch) 鈭� Square, solid 12.5 mm (1/2 inch)
鈥urface: phosphatized, oiled
鈥IN 3121
鈥ade in Germany
鈥rive: Square, hollow 12.5 mm (1/2 inch)
鈥utput: Square, solid 12.5 mm (1/2 inch)
鈥imensions / length: 130 mm
鈥et weight: 0.26 kg
鈥or impact operation
- Length [mm]: 175
- Material: Chrome Vanadium Steel, Nickel-Chrome-Molybdenum
- Surface: Phosphatized, Oiled
- DIN / ISO: DIN 3121
- Drive side (profile): Rectangle
- Square Drive Tang Size [mm (inch)]: 20 (3 / 4")
- Bolt Head- / Nut Design: Hybrid special profile (Mercedes-Benz)
- Operating Mode: for machine actuation
- Net weight [kg]: 0,82
- Item number: 1005S-7
- Our price: 98,90 €
- Manufacturer: HAZET
- EAN number: 4000896001774
- Condition: New
HAZET Impact extension 1005S-7 鈭� Square, hollow 20 mm (3/4 solid 鈥ith borehole for locking pin or safety spring and grove for O-ring inch) 鈭� Square, solid 20 mm (3/4 inch)
鈥urface: phosphatized, oiled
鈥IN 3121
鈥ade in Germany
鈥rive: Square, hollow 20 mm (3/4 inch)
鈥utput: Square, solid 20 mm (3/4 inch)
鈥imensions / length: 175 mm
鈥et weight: 0.82 kg
鈥or impact operation
price incl. 19% VAT
excl. delivery costs
- Length [mm]: 180
- Material: Chrome Vanadium Steel, Nickel-Chrome-Molybdenum
- Surface: Phosphatized, Oiled
- DIN / ISO: DIN 3121
- Drive side (profile): Rectangle
- Square Drive Tang Size [mm (inch)]: 25 (1")
- Operating Mode: for machine actuation
- Net weight [kg]: 1,34
- Output end (profile): Rectangle
- Square drive tang dimensions [mm (in)]: 25 (1")
- Item number: 1105S-7
- Our price: 121,83 €
- Manufacturer: HAZET
- EAN number: 4000896002702
- Condition: New
HAZET Impact extension 1105S-7 鈭� Square, hollow 25 mm (1 solid 鈥ith borehole for locking pin or safety spring and grove for O-ring inch) 鈭� Square, solid 25 mm (1 inch)
鈥urface: phosphatized, oiled
鈥IN 3121
鈥ade in Germany
鈥rive: Square, hollow 25 mm (1 inch)
鈥utput: Square, solid 25 mm (1 inch)
鈥imensions / length: 180 mm
鈥et weight: 1.34 kg
鈥or impact operation
price incl. 19% VAT
- Length [mm]: 330
- Material: Chrome Vanadium Steel, Nickel-Chrome-Molybdenum
- Surface: Phosphatized, Oiled
- DIN / ISO: DIN 3121
- Drive side (profile): Rectangle
- Square Drive Tang Size [mm (inch)]: 25 (1")
- Operating Mode: for machine actuation
- Net weight [kg]: 2,17
- Output end (profile): Rectangle
- Square drive tang dimensions [mm (in)]: 25 (1")
- Item number: 1105S-13
- Our price: 153,29 €
- Manufacturer: HAZET
- EAN number: 4000896002696
- Condition: New
HAZET Impact extension 1105S-13 鈭� Square, hollow 25 mm (1 solid 鈥ith borehole for locking pin or safety spring and grove for O-ring inch) 鈭� Square, solid 25 mm (1 inch)
鈥urface: phosphatized, oiled
鈥IN 3121
鈥ade in Germany
鈥rive: Square, hollow 25 mm (1 inch)
鈥utput: Square, solid 25 mm (1 inch)
鈥imensions / length: 330 mm
鈥et weight: 2.17 kg
鈥or impact operation
price incl. 19% VAT
- Drive side (profile): Rectangle
- Operating Mode: for machine actuation
- Net weight [kg] 0
- for article number: 900S-13, 900S-14, 900SK / 4, 900SLG-13, 995S-T30, 995S-T40, 995S-T45, 995S-T50, 995S-T55, 995S-T60, 900SZ-12, 900SZ-13, 900SZ-14, 995S6-T40, 995S6-T45, 995S6-T50, 995S6-T40LG, 995S6-T45LG, 995S6-T50LG, 985S-14LG, 985S-17LG, 985S-19LG, 985S-14, 985S-17, 985S-19, 985S-22, 985S-24, 985S-14LG / 4, 985S / 11, 990S-14, 990S-16, 990S-18, 990S-14LG, 990S-16LG, 990S-18LG, 900S-E10, 900S-E12, 900S-E14, 900S-E16
- Square Drive Tang Size [mm (inch)]: 12.5 (1 / 2")
- Item number: 900S-H1014
- Our price: 0,54 €
- Manufacturer: HAZET
- EAN number: 4000896044702
- Condition: New
HAZET Connecting pin 900S-H1014 鈭� Square, hollow 12.5 mm 鈥onnecting pin for sockets Inside square 12.5聽=聽1鈦�2鈥� (1/2 inch) 鈭� 鈭� 3 x 20 8聽鈥撀�14聽mm 13聽mm long style 鈭� E10聽鈥撀燛16 T聽30聽鈥撀燭60
鈥ade in Germany
鈥rive: Square, hollow 12.5 mm (1/2 inch)
鈥et weight: 0 kg
鈥or impact operation
price incl. 19% VAT
excl. delivery costs
- Drive side (profile): Rectangle
- Operating Mode: for machine actuation
- Net weight [kg] 0
- for article number: 1000S-19, 1000S-22, 1000S-24, 1000S-27, 1000S-28, 1000S-30, 1000S-32, 1000S-33, 1000S-34, 1000S-36, 1000S-G1736, 1000SLG-24, 1000SLG-27, 1000SLG-30, 1000SLG-32, 1000SLG-33, 1000SLG-36, 1003S-1, 1004S-32, 1004S-33, 1005S-7, 1007S-1, 1007S-2, 1007S-7 / 4, 2784-T60 / 4, 2850-E20, 2850-E24, 990S / 11, 1006S, 1005S-13
- Square Drive Tang Size [mm (inch)]: 20 (3 / 4")
- Item number: 1000S-H1736
- Our price: 1,68 €
- Manufacturer: HAZET
- EAN number: 4000896001361
- Condition: New
HAZET Connecting pin 1000S-H1736 鈭� Square, hollow 20 mm (3/4 鈥onnecting pin for all connections Inside square 20聽=聽3鈦�4鈥� e.g. 2784-T60/4 鈭� 990S/11 inch) 鈭� 鈭� 4鈥墄鈥�36
鈥ade in Germany
鈥rive: Square, hollow 20 mm (3/4 inch)
鈥et weight: 0 kg
鈥or impact operation
- 1
- 2
- 3
- 4
- 5