333体育直播免费在线平台

Tool cabinet with 7 drawers and 207 tools 鈥�7 ball bearing drawer with 100% pull-out and capacity of 35 kg

鈥�Enormous stability due to individual fastening of each drawer

鈥�400 kg total load capacity

鈥�Unpacking - immediately ready to use



The high-quality powder-coated professional tool cabinet is always there just when it鈥檚 needed! Spending all day running back and forth is a thing of the past. With help from the ergonomic push handle integrated into the plastic tray, it鈥檚 quite easy to manoeuvre through the workshop and protects the edges on the corners from collisions. Thanks to its 2 parking brakes on the swivel castors, it remains in place at its destination. More room! The workshop cabinet has seven drawers. Two drawers are extra high and thus provide plenty of space for drills and other large tools. With the hanging slot on the side, additional storage space can be created with the right brackets. All drawers are supported by ball bearings and pull out 100% even at the maximum capacity of 35 kg. This means that getting to your tools is no problem whatsoever. To make sure your professional tool cabinet does not tip over, all drawers lock individually and can also be secured with the central lock. The professional tool cabinet in detail: Total capacity: W 77 x H 97,5 x D 47 cmDrawer internal dimensions: 5x 52,8 cm x 39,8 cm x 55 mm2x 52,8 x 39,8 x 13,5 cmTotal load capacity: 400 kgLoad capacity of each drawer: 35 kgFull pull-out: YesBall-bearing: YesLocking mechanism: IndividualCentral lock: on the side, 2 keysEdge protection: PlasticCastor: 2 swivel castors, 2 fixed castors

14x18mm Push fit ring spanner (box wrench), 14mm

3/8" Socket, 6mm

Torque angle gauge, 3/4", claw

鈥�Replacement glass for welding helmet BT156915

鈥�C濒别补谤

鈥�P濒补蝉迟颈肠



The BRILLIANT TOOLS protective glass for welding helmet BT156915-1 serves as a replacement if the protective glass on the welding helmet (BT156915) gets scratched or damaged by flying sparks, and needs to be replaced.

Combination spanners set, offset, 5 pcs 8-19mm 鈥�flank traction profile

鈥�according to DIN 3113 Form A / ISO 3318 / ISO 7738

鈥�jaw 15掳 offset

鈥�ring head 15掳 offset

鈥�polished heads

鈥�matt finish

鈥�chrome vanadium

鈥�enables quick pre-fastening of the screw connections

鈥�especially for using in confined spaces

鈥�especially suitable for rapid screw tightening with the T-handle

鈥�it is simply to be used in place of the standard box wrench

鈥�ergonomically shaped T-handle

鈥�square drive adaptor to DIN 3120 / ISO 1174 with ball lock

1/2" ERGOTORQUE庐precision torque wrench with reversible ratchet head, 20-100Nm

T-handle box wrench, 3/8"

3/8" 12 Point socket, 19/32"

3/8" Socket, 6mm

9x12mm ERGOTORQUE庐precision torque wrench toolkit with retangular tool holder, 10-50Nm, 33 pcs

Torque angle gauge, 3/4", claw 鈥�set contents ideal for air conditioning and refrigeration engineers

鈥�actuation accuracy: 卤3 % tolerance of the set scale value

鈥�precise reading accuracy for a minimum 5.000 tightening cycles

鈥�for controlled fastening in clockwise and counter clockwise directions

鈥�changing the operating direction takes place by turning the torque wrench

鈥�double scale in Nm and lbf鈥�ft divisions for precise adjustment

鈥�includes micrometer scale in Nm divisions for precise and fine adjustment

鈥�large vision panel, precise adjustment using a magnifying glass

鈥�an audible and palpable signal when the desired torque value is achieved

鈥�torque setting is quick and easy using the locking knob in the handle end

鈥�secure locking function within the handle

鈥�two component handle with a soft zone, is ergonomic in design and comfortable in the hand

鈥�with snap lock retangular tool holder for 14x18 range of end tools

鈥�individually marked with serial number - unique product identification

鈥�including certificate according to DIN EN ISO 6789:2017(E)
- traceable to national standards